Jump to content
SAU Community

Recommended Posts

Anyone here use their M35 Stagea as a daily family car? I currently own a VZ exec wagon for the same purpose and would prefer something a bit 'sportier' in a family mover. So to you who do use your Stagea as a daily... A few questions?

Average fuel consumption (with minimal mods) drove normally? My VZ gets around 10-10.5L/100kms babying it for comparison.

Insurance? Mega expensive? (28y.o/perfect history)

Service costs? Compared to the average Aussie family car? I expect it to be a little more expensive due to it being an import, but not say... Legnum expensive?

In general... Does an M35 Stagea make a good family car?

Link to comment
https://www.sau.com.au/forums/topic/370341-m35-stagea-as-a-daily-family-hauler/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Fuel economy babying it is around 13-14L/100

Insurance can be mega expensive, depends who you go through. I've seen anywhere from $800-2000 for full comp.

Service costs? I've seen nothing shocking so far. Quality fluids and filters are the same price, I guess the difference is you want to make sure you put quality stuff in. Just depends on whether stuff breaks, but most parts I've bought so far haven't been much more expensive.

I think it'd make a good family car, but I don't have a family :P

* Yes, I use it for eeeeeverything.

* Yes it makes an awesome family car (no kids but a wife and 90kg of canine means I need a wagon).

* Fuel economy will not be fantastic. I drive a lot of hwy and generally average 10-11L/100 or so. Around town is pretty bad, but they have a bit fuel tank for a reason!

* Insurance I pay 1200pa full comp as a daily with all my mods listed through Shannons (34yo)

* Servicing shouldn't be more expensive than any other Nissan... but do yourself a favour and do your own servicing.

as a daily yes it'll work but u do have to consider warming it up and cooling it down............ u cant just do 5min runs in it, and that said females usually dont have a clue on this.

i know my car is a little over tempremental but even stopping into a servo and filling up doesnt always make the car to happy to start again if its a quick stop............

other than that it's a great car, done everything from going on holiday with 5 mates and stacking the car to hauling my german sheperd around, but also if ur like me and u get a car like this the mods keep coming pretty damn quick!!!!!!

cheers, Theo.

You might need to look at that starting problem Theo, I've never had an issue...

pretty sure its the battery too and i'll do another ecu reset but i'll let them do that when i go for a service in 600km and get my free battery under warranty :)

i know my car is a little over tempremental but even stopping into a servo and filling up doesnt always make the car to happy to start again if its a quick stop............

Turn the key to the accessory position for 2-3 seconds before cranking it over instead of just quickly turning the key. :thumbsup:

Turn the key to the accessory position for 2-3 seconds before cranking it over instead of just quickly turning the key. :thumbsup:

aaahhh let the glow plugs warm up first aye :P ROFL............... bloody diesels HAHA

I use my car as a daily driver/work/family car.

Average economy prior to mods = 12.7L/100 with mods 13.5 - 14.5L/100km.

Servicing costs are cheaper than any other car I have owned as I do all my own work on it. No timing belt to replace and very helpful forum make looking after it possible.

Insurance = 1500 but my stock Outback cost 900 so not much more given that is not business registered. Oh the value of living in Sydney. (over 40 and good driving record)

pretty sure its the battery too and i'll do another ecu reset but i'll let them do that when i go for a service in 600km and get my free battery under warranty :)

Sounds like the battery....I had the same problem.....battery lost amps

yet another family man here.. love it the stagea dearly!

i put on my on direct gas injection to keep fuel costs down.. get about 16L per 100 giving it squirt now and then and the rest in traffic gets a bit better on the freeway.

would highly recommend one!

  • 3 weeks later...

was looking into legnums too before deciding on the stagea...

had a chat with a few mates and they mostly adviced me to go for the M35 stagea because of support (service etc cos shared with most local Nissans), newer (01-04) compared to Legnums (95-01? correct me if i'm wrong), and the luxury features offered with the M35 (Axis, ARX and RX? i'm noob, correct me again if i'm wrong)...

was looking into legnums too before deciding on the stagea...

had a chat with a few mates and they mostly adviced me to go for the M35 stagea because of support (service etc cos shared with most local Nissans), newer (01-04) compared to Legnums (95-01? correct me if i'm wrong), and the luxury features offered with the M35 (Axis, ARX and RX? i'm noob, correct me again if i'm wrong)...

legnum lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...