Jump to content
SAU Community

Recommended Posts

lol nah she spent $1k on me i think thats enough.

ill do sway bars eventually but as ive made a dramatic improvement over the previous suspension ive had, i think ill just get used to these first..

Lol dude, was just stirring; anytime you're ready.:thumbsup: They'll make a nice amount of difference, especially since your shocks were fairly stuffed to begin with.

  • 1 month later...

So is it 2x3mm washers that are required on each coilover? Does it matter what they are made of?

Pm me your address; I'll post some to you. I has a shite load of them.

Sorry I should really keep all of the questions/info here.. What is involved with the rear spring removal in the M35? can you just take the outer bolt out of the "lower spring mount" and that is enough to drop the spring out or is there more to it?

Sorry I should really keep all of the questions/info here.. What is involved with the rear spring removal in the M35? can you just take the outer bolt out of the "lower spring mount" and that is enough to drop the spring out or is there more to it?

As Dale once said..

To remove the STD rear spring it is easier to undo the inner mount for the lower arm (one with the spring seat) and lower the whole arm supported with a jack. Mark the eccentric bolt on the lower arm before removal. You'll be aligning once you're done; but at least you're no worse off. The STD spring is very long and you won't be able to swing the arm far enough down to remove the spring from the seat.

I thought you said you'd sussed it out already :P

Is anyone finding that they need to set the rear passenger spring lower than the drivers rear to get the back of the car level?

I'm using Tanabe and the rear passenger side needs the spring adjusted lower to try and level the car out. Now it's to the point where I lower the rear passenger but when the car has settled it hasn't changed the height of the car. I'm lost as I can't work out why that corner won't come down even though I'm lowering the spring.

Is anyone finding that they need to set the rear passenger spring lower than the drivers rear to get the back of the car level?

I'm using Tanabe and the rear passenger side needs the spring adjusted lower to try and level the car out. Now it's to the point where I lower the rear passenger but when the car has settled it hasn't changed the height of the car. I'm lost as I can't work out why that corner won't come down even though I'm lowering the spring.

Have you loosened all the control arm mounting points to release the tension on the bushes? This can limit adjustment. You'll need to have the car on ramps so everything is loaded and at ride height.

Also, check the springs to see if they're marked left/right or nearside/farside. I wouldn't expect that, but you never know...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
    • Nice shot! They look super clean. The roof rack delete on the black one is interesting. Would like to see more pictures from different angles. It's subtle but could make quite a difference to how the car looks in profile.
×
×
  • Create New...