Jump to content
SAU Community

Recommended Posts

apparenty the largest bolt on injectors you can put into them are 550cc from nismo...but im really unsure about this.

also, the turbo sux ass. it might spool up quick, but as soon as you run higher boost through it, it starts to whinge - you might even lose your exhaust wheel to your catalytic convertor.

the other gripe i have is the stupid climate control display, in sunlight you cant see a friggin thing because of the glare! but i think this is a generic skyline problem...

sewid:

I thought they all look the same ? Actually this leads to another question.. eheh :rofl: Is there more info on the diff between series 1 and 2? I wasnt even aware of there is a series two of the R34 GTT. :)

As to the front bar.. I have an after market bodykit and it dont look too bad. :)

franks:

Interesting about the injectors.. will keep that in mind.. The stock turbo seems ok for me, as I'm sorta running standard boost atm :)

I agree with the climate control annoyance.. but guess I can live with it :)

apparenty the largest bolt on injectors you can put into them are 550cc from nismo...but im really unsure about this.

also, the turbo sux ass. it might spool up quick, but as soon as you run higher boost through it, it starts to whinge - you might even lose your exhaust wheel to your catalytic convertor.

the other gripe i have is the stupid climate control display, in sunlight you cant see a friggin thing because of the glare! but i think this is a generic skyline problem...

What kind of higher boost are you talking about Franks? Have you blown one? I haven't gone to higher boost yet but I'm not far from it.

Weird about the injectors. I would have thought that would be the same as the older RB25's. 550 would be ok with a not too crazy turbo upgrade though wouldn't it? (2535?)

Anyone know about the limits of the fuel pump?

wouldnt be worthwhile putting a GTR turbo on as they have a T2 flange and the RB25 needs a T3 flange (it could be the other way around) - so an adaptor plate needs to be made up.

best upgrade for the RB25 in regards to a bolt-on turbo, with an internal wastegate, would be HKS 2530, 2535 or 2540.

abo bob, are you coming to dinner tonite?

higher boost, 0.8bar and daily driven? im starting to find that the turbo won't even hold 0.9bar!!!

0.8bar with regular squirts and the turbo starts to whine like it has a leeking gasket somewhere. i almost think its the compressor or exhaust blade touching the housing :spank::) :)

as for fuel pump, im on 200rwkw using stock fuel pump and injectors and i havent even maxed my injectors yet (according to powerfc). i'll be close though if i can run 1.0bar...

Interesting. I've been hanging to check out your car man and I'll be there tonight. Also I think you might have something to say about mine when you hear it. I've had a whine (we'll find out tonight if it's the same one as yours) since I got the car.

Boost is stock and holds it fine. Car goes good but the guy I bought it off says the sound it makes is not normal and is curious to check it out at the next service.

my car looks like a piece of shit at the moment :spank: nothing to write home to mum about thats for sure!!! sideskirts and rear pods are off, but, they'll be back on this saturday - should scrub up a little better :)

my turbo doesnt start whining until it hits 0.8 or so bar repeatedly :Paranoid: under normal driving conditions its fine...if yours is whining continuously on stock boost, then i suspect a dying turbo - good excuse to upgrade :)

Hello all,

Just like to have an idea on some weaknesses (if there is any) on skyline R34 GTTs ?  Other than the weight factor of course. :(

Only ONE turbo, only TWO wheel drive, doesn't have SIX throttle bodies :devfu:

Sorry - felt like a bit of stirring today. I actually thought long and hard a year or so ago about whether to by an R34GTT or R32 GTR. The GTT is still a great car with plenty of potential.

Whew.... so far looks like I dont have a hard job later on in fixing up any weaknesses :( Thank you all for the valuable information. :)

BTW.. If memory did not fail me.. there was a skyline in the current special edition of HPI that has a r34 GTT engine in it and it was using 700cc injectors.. :)

the only weakness in any skyline is the clown in the drivers seat that insists on making it faster, sexier, louder, etc!!! oh and the plastic exhaust impeller that likes to turn into powder when given curry at higher boost settings!! and the fact that the rear tyres wear quickly..... Oops, no thats the driver again!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...