Jump to content
SAU Community

Recommended Posts

Only reason why Haltech came up is that's what the tuner suggested, and if it's got local support I was willing to look at it.

Cihan is sounding like a good option, or I'll see how Dunc goes with Willall. As long as someone local can fix/retune it.

Haltech option is a new unit which works with 350Zs, so they figure it'll work with VQ25s using the same trigger pattern. I have a quote for $500-1000, but no guarantees it'll work.

Be vary wary... last time I heard that comment "it works on a 350z, it should work on VQ25DET" it cost Jetwreck a lot of wasted money.

The motors in the 350Z and the NM35's are different and so is the ECU.

My word of advice is.... unless they have done it before (and you have seen the results) don't belive them.. they all lie..

Be vary wary... last time I heard that comment "it works on a 350z, it should work on VQ25DET" it cost Jetwreck a lot of wasted money.

The motors in the 350Z and the NM35's are different and so is the ECU.

My word of advice is.... unless they have done it before (and you have seen the results) don't belive them.. they all lie..

True. reminds me of the guy in UK who was so confident that he could flash our ECU with the ROM they use in the 350Z...

showed him the pin out for our ECU and he said no can do!

Haltech 350z Platinum was used as a piggyback on a VQ25det Stagea very early on (3-4 years ago).

I believe it is a standalone unit on a manual 350z/V35

Results were a bit meh... but only mod was a cat-back as far as I can remember

They're talking this: http://www.haltech.com.au/index.php/product/platinum-sprint-series/platinum-sprint-500

But considering I picked up an Emanage for a third of the price, they haven't given me a good reason to use the Haltech. Sure, if it takes over everything instead of doing the addition/subtraction table, that sounds good. But if you get a tuner who knows what they're doing I can't imagine there'd be a remarkable difference.

your running 25psi now?? ffs.. surely the factory internals wont do that for long! :)

you'd be suprised.

lol

im sitting at around 22psi. scotts somewhere at 25psi.

ethanol is one hell of a drug

Haha, my boost peak is 1.92 bar according to the informeter. :whistling:

The issue isnt boost but air volume and this turbo blows a lot of air. Still a fair bit in the old girl but the engine has been running at over 20 psi for two years now, as well as burning the ethanol.

  • 2 weeks later...

Ok so i am keen though i have just had a look though no idea where to begin so i photoshopped a pic :)

boost.jpg

Here is my engine bay. Remember i have LPG so may look a bit different!

Now number 1 is the hitachi boost controller.. now that has a single air line to it from underneath the intercooler pipe. from there number 5 runs out of the controller and splits into 2.. one section running to number 2 and the other into a much bigger part of the loom that disappears from view.

As you can see number 2 then splits off 2 more times in 2 different directions.. and god knows what 6 and 7 do!

So what exactly do i do to hook up a bleed valve?

i know i can simply cut the air line to the controller and put the valve in between.. though id like to remove the factory unit altogether.

Little help please :)

Ok so i am keen though i have just had a look though no idea where to begin so i photoshopped a pic :)

boost.jpg

Here is my engine bay. Remember i have LPG so may look a bit different!

Now number 1 is the hitachi boost controller.. now that has a single air line to it from underneath the intercooler pipe. from there number 5 runs out of the controller and splits into 2.. one section running to number 2 and the other into a much bigger part of the loom that disappears from view.

As you can see number 2 then splits off 2 more times in 2 different directions.. and god knows what 6 and 7 do!

So what exactly do i do to hook up a bleed valve?

i know i can simply cut the air line to the controller and put the valve in between.. though id like to remove the factory unit altogether.

Little help please :)

1 is a boost sensor not the controller.

6/7is th fuel regs.

your stock boost solenoid is on the right which is out of the pic.

if you want come around to mine and ill hook it up for you.

under '1' plug theres a hose, the bleed valve taps into that

thanks for info Aaron! might take you up on that offer! i am going for work for the next 10 days will hit you up when i get back :)

Also the intake baffle (the dick that hangs off the intake) anyone remove it? any gains?

yup I removed it with my old standard intake....didn't notice any difference.

btw....I found this boost tee to be the best out of all the manual ones I have tried.

http://www.ebay.com....7#ht_500wt_1156

Edited by Jetwreck

thanks for info Aaron! might take you up on that offer! i am going for work for the next 10 days will hit you up when i get back :)

Also the intake baffle (the dick that hangs off the intake) anyone remove it? any gains?

all good man just shoot me a pm..

no gains from removing the baffle. no sound change either.. if u want u can remove it but not much point

and do you have a boost gauge yet?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...