Jump to content
SAU Community

Recommended Posts

Iv got a hks ssq bov that doesn't flutter was wondering if there's any way to make it? Don't get me wrong I love the sound of the standard sound but would like to hear Wat it sounds like.fluttering any ideas?

There is a bolt on the back for adjustment..

Thanks

-Jayden-

Link to comment
https://www.sau.com.au/forums/topic/370845-hks-ssq-bov-flutter/
Share on other sites

Iv got a hks ssq bov that doesn't flutter was wondering if there's any way to make it? Don't get me wrong I love the sound of the standard sound but would like to hear Wat it sounds like.fluttering any ideas?

There is a bolt on the back for adjustment..

Thanks

-Jayden-

Want flutter? Don't run a bov. A bov is designed to stop compressor surge (flutter)

How do I achieve flutter with out surging?

Blank your bov or block the vacuum line(not with stock bov because it will still open on full boost). im not sure on the hp limit but i wouldnt do it over 300hp. someone should be able to shed some better light on the subject.

Edited by Blueone

^ Shit post is shit

Tightening the BOV or blocking it is just going to cause compressor surge. Stao told me to avoid any compressor surge but I really do like the sound of it.

Only if you tighten it too much.. I think you will find that true compressor surge is actually when the engine cant swallow the boost the turbo is throwing at it.

It will frighten you...

^ Shit post is shit

Tightening the BOV or blocking it is just going to cause compressor surge. Stao told me to avoid any compressor surge but I really do like the sound of it.

Cool story bro!

having no BOV does not cause compressor surge :thumbsup:

Agreed. It was a simple question with a simple answer. if you dont like flutter, then f**k off and dont post. Noone cares what you have to say.

So anyway, back OT, im guessing there will be a little locking nut you need to undo, then wind the screw in a few turns, and re lock the nut.

Just try it on different settings untill you find a sound you like.

I have a Greddy Type RS and did the same. I didnt want flutter, but having it really loose sounded poop, so i tightened it up a touch. I get flutter at very low load/boost and light VAC, but once the boost is up a few psi it opens properly.

I dont see it causing any harm. Has been like it for a year or so now.

Agreed. It was a simple question with a simple answer. if you dont like flutter, then f**k off and dont post. Noone cares what you have to say.

So anyway, back OT, im guessing there will be a little locking nut you need to undo, then wind the screw in a few turns, and re lock the nut.

Just try it on different settings untill you find a sound you like.

I have a Greddy Type RS and did the same. I didnt want flutter, but having it really loose sounded poop, so i tightened it up a touch. I get flutter at very low load/boost and light VAC, but once the boost is up a few psi it opens properly.

I dont see it causing any harm. Has been like it for a year or so now.

Thanks mate did just that it sounds great but I'm running standard turbo standard boost and it sounds like its coming out of the pod but coz its low boost it can't do n e damage can it ?

Thanks mate did just that it sounds great but I'm running standard turbo standard boost and it sounds like its coming out of the pod but coz its low boost it can't do n e damage can it ?

I ran my stock turbo with a blocked BOV since I bought the car. Took it out, there is very minimal shaft play. Never had any issues. The sound will be coming out of your pod.

Some people think flutter is the bov opening and closing rapidly... I don't think this happens. Although those are generally youtube comments. I'm gonna reinstall my turbosmart BOV after I get my plumb back adapter and tighten it up so I get flutter on low boost but don't risk damage on higher boost.

lol to all the people saying surge isnt flutter, they are teh saem thing as the car above on the dyno, just happen when you lift off instead of under load. As far as the turbo is concerned it is the same thing(running too far to the left of the compressor map past the surge line)

Reverb.

The trapped boost pressure when the throttle plate is closed has no here to go but back out through the compressor turbine and out the airfilter.

A BOV releases this pressure so it doesnt have to force its way back through the turbine.

I run my BOV's fairly tight so at low boost you get a reverb(flutter) but anything over 9psi the bov helps to release the pressure.

I have never seen or heard of a turbo dieing due to this.

lol to all the people saying surge isnt flutter, they are teh saem thing as the car above on the dyno, just happen when you lift off instead of under load. As far as the turbo is concerned it is the same thing(running too far to the left of the compressor map past the surge line)

Compressor surge is not flutter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...