Jump to content
SAU Community

Recommended Posts

Guys

I'm on the hunt for some ID2000 injectors and am being told different things by different shops. Coming here to hopefully clear it up.

this is what i've been told...

Injector Dynamics don't manufacture injectors they flow test and report injectors and publish results that are inflated. This is due to using Petrol as testing fluid, rather than calibration fluid that the manufacturers use.

Bosch is the manufacturer of these units and this injectors great success comes all down to Bosch being the current market leaders with injector technologies.

We (powerflow performance) offer the same or some customers say, a better level of service and product quality to the ID products.

All fuel injectors sold by Powerflow Performance, undergo flow testing and packed into matched sets within a maximum of 2% variation. *Note* 1680, 2000 & 2200cc injectors matched tolerances of up to 5%.

so...is this true or false?

And who here has any experience with powerflow performance in melbourne? if yes, good or bad?

thanks

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/
Share on other sites

Of course the sales rep is going to say their product is better

I use genuine ID2000's and the car idles and drives like factory.

I used a local injector (wont say name) previously and it was terrible.

Well worth spending the coin on the proper gear and not trying to save a few dollars when it comes to injectors.

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/#findComment-5921456
Share on other sites

Guys

I'm on the hunt for some ID2000 injectors and am being told different things by different shops. Coming here to hopefully clear it up.

this is what i've been told...

Injector Dynamics don't manufacture injectors they flow test and report injectors and publish results that are inflated. This is due to using Petrol as testing fluid, rather than calibration fluid that the manufacturers use.

Bosch is the manufacturer of these units and this injectors great success comes all down to Bosch being the current market leaders with injector technologies.

We (powerflow performance) offer the same or some customers say, a better level of service and product quality to the ID products.

All fuel injectors sold by Powerflow Performance, undergo flow testing and packed into matched sets within a maximum of 2% variation. *Note* 1680, 2000 & 2200cc injectors matched tolerances of up to 5%.

so...is this true or false?

And who here has any experience with powerflow performance in melbourne? if yes, good or bad?

thanks

Powerflow is VPW and they are a fantastic company but to rubbish ID's is just crazy, it shows a lack of understanding on their behalf.... maybe too many carby guys there.

Out of all the injectors ive used over the years the ID's really do perform as per expectations... im happy to pay extra for matched sets..... my egt results confirm it.

btw 5% of 2200 is a whopping 110cc......

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/#findComment-5921502
Share on other sites

I used a local injector (wont say name) previously and it was terrible.

By local injector, do you mean a locally supplied or locally made/highflowed injector?

If locally supplied, was that also a flow matched bosch?

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/#findComment-5921524
Share on other sites

Retail is only $750 with adaptors for the ID1000's and $1050 for the ID2000's. Any more than that and you're paying too much

I know theyre the same injector, but are you talking about ID2000's or standard bosch 2200cc EV14's straight out of the packet?

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/#findComment-5923943
Share on other sites

injector dynamics modify the existing bosch ev14 injector with there own nozel. because they are a ball type injector this is posible. (not a pintle and seat.)

The bosch and ID injectors are identical. Injector dynamics take a bosch injector, put their pretty nozel on the end (which makes no difference to the spray pattern), machine off the last 3 digits of the part number and flow and dead time test each batch.

When you buy a bosch injector locally, you get the same bosch injector, last three digits of the part number are machined off (to protect bosch) and they are flow tested etc.

I know if I had the choice, I'd be going genuine Bosch, unmodified and exactly how they were intended. They flow the same anyway and the price is better. Win/win

Link to comment
https://www.sau.com.au/forums/topic/371443-id-injectors/#findComment-5925276
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...