Jump to content
SAU Community

Recommended Posts

Hi guys im wondering if there is much difference in the tunabilty of the nistune as apposed to the power fc?

Im running a nistune at the moment with stock turbo and all the bolt ons and im currently making 272hp@thewheels or 203kw@thewheels with 12psi boost

Im getting ready for a turbo upgrade a hks 2835 kai and just wondering if there is any advantages going to a power fc over my nistune?

Link to comment
https://www.sau.com.au/forums/topic/371467-power-fc-vs-nistune/
Share on other sites

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Edited by Ruff Ryda

PowerFC - IMO best to get the D-Jetro, otherwise NIStune hands down. D-Jetro uses a MAP sensor but takes longer to tune. Great to push a little more from your application in terms of tuning but not a big deal .PowerFC can be tuned every 400 RPM

NIStune - Best bang for buck, streetable, knock sensor, limp-home mode and cheaper to tune whenever you make any mod changes. NIstune is tuned at every 500 RPM.

Haltech ECUs can be tuned every 250 RPM but then you need to find a reputable Haltech tuner.

For response, get the Precision 4828, based on the GT2860RS but billeted and cheaper. :thumbsup:

Otherwise you have the 5128 and 5130 to choose from (the miss-matched GT2871R or the efficient GT3071R replacement).They go on of course but so does the lag and cost.

Lots of mis-information there ^^^^

Power FC has never done me wrong. I don't tune the car, I drive it so I don't care what is and what isn't more tuneable. There is a tuner out there who can work with anything so just take it to a reputable nistune/power fc tuner.

If you've got a nistune stick with it, if you got PFC stick with it. If you got stock, its up to your wallet. I'd always go PFC is I was a stock R33/R34. I'm not doing anything extreme with my car, all bolt on mods so a PFC is more than enough. Don't need djetro, never had issues with a Z32.

nistune will pass an inspection, power FC wont.

I'd be choosing it purely on that basis.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

You can put the Power FC gear into your standard ECU housing. NIStune is not legal as it is a modified, programmable ECU. Its just because it looks stock. If you do an emissions test, both ECU's will probably fail on regular fuel and mods.

If you can fit it into the stock housing then thats a good option! Looking stock was the point I was trying to make.

Ok so im not gunna make any substantial power gains with a power fc then?

Best off just keeping the nistune and getting it re-tuned when i get my injector and turbo upgrade then?

Can i get some opinions of good RB25 tuners in sydney who can work wonders with my nistune?:thanks:

regardless of ecu, the car will make xyz RWKW or KW or HP blah blah

there is no legitament reason another ECU will make more power

if it does, the other was not tuned properly

air fuel spark make power not the ecu

pick one that your tuner is competent with

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oof. One of my mates has an R34 GT-R that he initially was a "I want to go twins for response and convenience" on his stock 2.6 with Kelford 272 cams, but his friends are pests and were always in his ear about their place being in the bin.   Eventually one of the 2860-5s decided to add it's own input and force his hand, so he conceded and went for a Pulsar 6262G ("G35 900") with T4 0.85 hotside.    Here's an overlay of the results, same cams, same stock bottom end, same boost, same fuel, just from a pretty tidy 2860-5 install to a Pulsar turbo on a 6boost maniifold on BP98.   Worth mentioning here, it may seem like a dead horse thing but the dyno plot doesn't tell the story of how much better it is to drive - transient response has completely changed the car, he used to have flat foot shifting to stop it having to wind up again on gear changes even at >7000rpm... now it builds boost faster than that even short shifting.   It's 100% transformed the car before you even consider how much better it holds on: Pulsar and Garrett aren't the same, but from our experience if you're just looking for a better drive and the ability to make the same or more power I think the divided G30 770 would probably be the smallest I'd go to.
    • Great work Duncan, any events local you will give it a test once all done? 
    • Sweet, yeah hoping stock gears will hold up. May use the transbrake feature on hill climb starts so that will test it.
    • Yeah, the thread is only nearly 20 years old.
    • Been down in Tassie for 2 weeks (a cruise, not a race for once) but spent a little time on her when I got back. I worked out the injector settings in the PowerFC were not correct for nismo 555s, set those to 66% +10ms and added a little air at closed throttle, set the timing (approximately, because it has some weird non 15o cells around idle) and now she starts and idles properly. She purrs like a kitten (ignore the co2 alarm in the background, I did  ) 20250518_171052.mp4 Next step, off for run-in, tuning and alignment!
×
×
  • Create New...