Jump to content
SAU Community

Recommended Posts

This EFI mob sound like the go, and I am planning a drop off-pick up situation. Happy for the experts to do their thing.

I read that VVT won't work unless I get a 300zx ecu??

You have an R34 and your new ecu is R34? It should run the VCT fine.

there's also east coast customs and toshi

toshi is a little different though, he tunes it on the road, meaning you drive around while he sits in the passenger seat and tells you what to do for most of the day. he's tuned 150+ rb engines and many other engines. prior to him doing tuning he also used to do some spirited street driving in japan.

http://www.skylinesaustralia.com/forums/topic/369646-toshi-will-coming-back-to-qld-in-30-th-november-this-monthfor-real-time-tune-on-road-r33-from-550/

http://www.skylinesaustralia.com/forums/topic/210097-nistune-powerfc-fcon-remap-ecu-road-tune-and-dyno-tune-available-in-sydneysending-to-other-state-and-over-seas-also-abailable-now/

FOOLBOOST's dyno results:

http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/page__st__720

Some other stuff abotu the process:

http://www.nissansilvia.com/forums/index.php?showtopic=497151

http://www.aus300zx.com/forum/showthread.php?t=315820

anyway that's enough before it looks like i'm trying to sell for him haha

  • 1 month later...

alright then i was wondering if its possible to dual map R34GTT using whatever ECU. im just trying to figure out if its possible because it would be a great way to save fuel and the engine because it would allow me to run it at an economical tune for normal days and race mode for whenever i need perfomance. I dont mind the price any suggestions. maybe ill should start my own topic.

im no expert.... but.....

The Nistune does a 5D multi layered bi directional tune for economy and power.

Its all the in Air flow meter and your right foot. Boost doesn't use more fuel if its tuned nice and lean. Or left in closed loop at low boost levels.

Required power levels uses more fuel....... regardless of air fuel ratio.

So what I am saying is.... drive everywhere at 200 hp at 14.7:1 and you will use exactly twice as much fuel as driving everywhere at 100 hp at 14.7:1

Try driving everywhere using 15 - 30 hp all the time....... use your right foot to keep it off boost and you will be surprised how good your fuel economy becomes.

well its a GT3037 it start to kick in at 2000rpm and kicks out at 4500rpm its a street turbo. So if i could avoid the early boost on an average day it would be great on my economy.

Lol so it "kicks out" at 4500rpm?

dual maps for "economy" and "power" are completely pointless as the perfect tune will give you the best of both. the only reason to ever run dual maps if for different fuel types or additives (nos etc).

get a decent tune (not just a full load tune like a lot of workshops do) and try to maintain a steady throttle position when cruising and you'll get good economy.

HYPED6, pretty spot on, it wont be exactly twice as much fuel (due to BSFC) but its close enough.

Can you please elaborate for me?

at different revs and loads the engine has different efficiencies. its most efficient at peak torque, which is why it produces the most force per revolution. obviously this varies with every engine but even with the same engine if you keep it at a constant rpm and go from 100hp output to 200hp output with the same AFR's (by opening the throttle further) your increasing chamber pressure, squish characteristics and timing (depending on the ignition map) which will all have an effect on the efficiency of the combustion. so whilst it isnt much you'd probably use slightly more than double going from 100hp to 200hp at the same revs and AFR's.

But, in the big scheme of things it doesnt really matter :nyaanyaa:

We can produce both powers at the same rev by adjusting the throttle plate.

Timing would be correct for the application at both loads.

If the AFR is the same fuel usage will be double.

However, I do believe I was caught up in the moment and using the word "exactly" may not bet totally correct.

There are many factors that come in to play like the difference in barometric pressure, air and fuel temp from the 2 events being 100hp and 200hp.

If measurable there would have to be some sort of variation.

The real concern is why your turbo is kicking out? I would be upset if my 3037 was doing that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...