Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

hey just interested to know,

when using 98 people say that 300kw's is the safe upper limit for a stock RB25DET, does using E85 mean that this upper limit is more?

I know that people are getting alot more, like 360kw on stock bottem end, but does that mean over the 300kw with ethanol is safe or just that its happening.. and not necessarily safe. is it to do with the temp/detonation or the stress on the parts?

just wondering cause i want to use E85 and not sure how much boost/power is a safe limit, dont need any rebuilds or gambles with the safe limits..

Edited by SliverS2
Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6437370
Share on other sites

e85 is alot nicer on engines and a good tune will make the engines "safe" number higher, so a safe 300kw from a rb25 e85 will take this to 340kw as power is made off timing not boost ie 15psi 300kw 98 / 15psi 340kw e85

this fuel is win/win

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6439150
Share on other sites

e85 is alot nicer on engines and a good tune will make the engines "safe" number higher, so a safe 300kw from a rb25 e85 will take this to 340kw as power is made off timing not boost ie 15psi 300kw 98 / 15psi 340kw e85

this fuel is win/win

Its just a shame that it isn't more readily available ALL over Adelaide.

I hope with the increasing amount of flex fuel cars coming to the market that this will promote more servos to stock E85.

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6440055
Share on other sites

well 2 decent places exist but yeh i hear what ur saying

u blokes need a flash tuner set up like us fraud boys flash in flash out easy as that

is there any sort of multipule switch tune ecu's out there for flyline?

we even has a j3 chip back in the old e series falcon yonks ago that was switchable

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6440753
Share on other sites

Shall be tuning the new found love of the 3 diamond variety on e85 in the next week or so.

Atm it stands at: Standard evo 7, hks dump + apexi exhaust with high flow cat, running very lean and kicking back to safety map 18psi produced 184kw at all 4 up to 5,800rpm limit (didnt want to go higher due to leaning out but it would have been around 200-210 on usual 22psi by the looks of things)

Bought: 1050cc injectors, aeromotive 340lph pump

e85 Results: in a weeks time :) prediction 240 - 250 at all 4, not bad for a standard car eh ;)

Edited by SkyHi_33
Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6446393
Share on other sites

Shall be tuning the new found love of the 3 diamond variety on e85 in the next week or so.

Atm it stands at: Standard evo 7, hks dump + apexi exhaust with high flow cat, running very lean and kicking back to safety map 18psi produced 184kw at all 4 up to 5,800rpm limit (didnt want to go higher due to leaning out but it would have been around 200-210 on usual 22psi by the looks of things)

Bought: 1050cc injectors, aeromotive 340lph pump

e85 Results: in a weeks time :) prediction 240 - 250 at all 4, not bad for a standard car eh ;)

Thats the great thing about evos, running dual maps on the standard ecu

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6446419
Share on other sites

Shall be tuning the new found love of the 3 diamond variety on e85 in the next week or so.

Atm it stands at: Standard evo 7, hks dump + apexi exhaust with high flow cat, running very lean and kicking back to safety map 18psi produced 184kw at all 4 up to 5,800rpm limit (didnt want to go higher due to leaning out but it would have been around 200-210 on usual 22psi by the looks of things)

Bought: 1050cc injectors, aeromotive 340lph pump

e85 Results: in a weeks time :) prediction 240 - 250 at all 4, not bad for a standard car eh ;)

My mate just bought a evo6 with only an exhaust and fuel pump, got steve knight to play around with it and made 250awkw on pulp. Steve did tune it on 30psi though haha, seems pretty high to me but i know nothing about evos.

Link to comment
https://www.sau.com.au/forums/topic/372229-e85-fuel/page/7/#findComment-6446720
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...