Jump to content
SAU Community

Rb25Det Induction Pipe

Checkbuzz

By Checkbuzz,
in Engines & Forced Induction

 Share

Recommended Posts

Checkbuzz Rising Star

Checkbuzz

Posted
Posted

Hi all

I know this topic has been covered but after much searching and reading I still have a question for those in the know:

Are the good quality silicon intake pipes (UAS, JJR, Samco) any good in high boost/horsepower applcations (i.e. do they suck shut)?

I'm looking at these because getting a custom intake made seems expensive, sleeving the stock one is only half a fix and the only alloy ones around (Performance-Wise) don't seem to be a very good fit (I have an alloy CAI and need the pod to sit exactly where it does now).

Failing this does anyone know where I can get a decent, factory-fit, alloy induction pipe?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/372995-rb25det-induction-pipe/
Share on other sites
HEKT1K Grand Master

HEKT1K

Posted
Posted

I had an alloy one custom made by ScottyNM35 (he's done a few for other members also). I'm not sure if I'd trust the silicone ones for high power applications. Cost more than the other options getting about, but well worth it in my opinion. Bolts up to factory airbox no dramas

Hanaldo Grand Master

Hanaldo

Posted
Posted

There are a couple of DIY's on sau where some steel piping is inserted inside the stock [rubber] intake. A decent cheap and quick fix for 'x' power.

sleeving the stock one is only half a fix

...

My advice would be to splash out on a custom stainless one. I did and I believe it to be money well spent. Custom will always fit your car perfectly. And the sound it makes... Oh the sound :wub:

Checkbuzz Rising Star

Checkbuzz

Posted
  • Author
Posted

@star33 - As you say "cheap quick fix" but not good enough from what I've read (see Hypergear thread) as they still restrict airflow at high power levels and I am looking for 250+rwkw

@Hekt1k - Thanks mate I have pinged ScottyNM35

@Honaldo - This may end up being the only viable option... How much did it cost you and where did you get it done?

T.D Experienced

T.D

Posted
Posted

I've had a fair bit of metal custom fabrication work done by Scott (Scottynm35) and I have to agree with Hekt1k, it's an excellent way to go.

I've been very happy with the work Scott has done for me and I'd definetly reccommend going the metal intake pipe with Scott :thumbsup:

SargeRX8 Grand Master

SargeRX8

Posted
Posted

If you are in Sydney, Fairfield exhaust shop will do custom intake pipes for $80 - $120 a piece. Really good price but I ended up making my own piece of shit. I wouldn't mind getting something proper made. I designed my metal pipe around the pod filter, and z32 and enclosure. I should have made a pipe bigger, all metal and then remade a box to suit. Silly me.

Checkbuzz Rising Star

Checkbuzz

Posted
  • Author
Posted

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Hanaldo Grand Master

Hanaldo

Posted
Posted

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Good choice, you won't regret it :thumbsup:

Looks hot, sounds awesome, and most importantly you know it is going to do the job you want it to do. Just make sure you get at least 3"! lol.

blah_blah Grand Master

blah_blah

Posted
Posted

Thanks for the feedback guys - I am going to go down the fabrication path

The general concensus seems to be that the silicon pipes are not the ideal solution.

I'm getting some work done at Sabbadin soon and I was in there yesterday looking at there fabrication work which is superb!

I may as well get it all done at once...

Good work, I've actually asked Rob as well on a quote to do that stuff, I'll be popping around Sabbadin today maybe he can do a group discount lol

JustinP Mentor

JustinP

Posted
Posted

Hey could you PM me some contact details for this guy? I have some custom pipework needs in a couple of months time. Does he do custom stainless exhaust parts too?

Mine was $250, was made by Kermit. Dunno if you've heard of him over there, but in the west he's the man you speak to when you need any fabrication work done :D

bubba Grand Master

bubba

Posted
Posted

You can do it with a 3" 45deg bend, a straight length of 3" pipe (couple of hundred mm long), 2x 3" straight silicon joiners & 1x 2.5"-3" silicon reducer.

Mine is welded but you could just use a silicon joiner to join the bend and straight bit. It is currently off getting a 2" bov return welded to it but when it comes back I'll take some pics :thumbsup:

Checkbuzz Rising Star

Checkbuzz

Posted
  • Author
Posted

There definately seems to be a big gap in market here for someone to exploit (I am unfortunately not that talented!)

Someone could make a killing if they could fabricate these in numbers for a decent price!

Good work, I've actually asked Rob as well on a quote to do that stuff, I'll be popping around Sabbadin today maybe he can do a group discount lol

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I have made a few for local guys that can drop in with their car, but every one of them was different. (pod, bov return, turbo intake size/position.) Makes it very hard to mass produce and make on the cheap unfortunately.

Its the fiddly bits like bov return, breather etc that take the time to get right, the steel bov piping also needs to be modified to align with the intake fitting.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

I have made a few for local guys that can drop in with their car, but every one of them was different. (pod, bov return, turbo intake size/position.) Makes it very hard to mass produce and make on the cheap unfortunately.

Its the fiddly bits like bov return, breather etc that take the time to get right, the steel bov piping also needs to be modified to align with the intake fitting.

To compensate for this, I am using some fat heater hose suitable for about 45psi, to return the BOV output. It seemed way too fiddly to get metal to metal fittings to line up. I would pay though to have a proper all metal intake pipe made.

Checkbuzz Rising Star

Checkbuzz

Posted
  • Author
Posted

As luck would have it I've managed to score myself an Apexi super suction intake pipe

A very nice piece of kit in cast alloy... nobody could fabricate anything of this much beauty out of exhaust pipe :P

Can't wait to hear the GT-RS sucking through this puppy!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...