Jump to content
SAU Community

Recommended Posts

Hi all,

Ive been searching for more power from my r33 with basic mods such as 3” exhaust, fmic, pod etc. My Tuner has recommended the ViPEC ECU with a tune plus the needed upgrade of a new fuel pump which is old and warn. Plus a boost increase from 0.7bar – 0.9bar.

The quote was for around 3.5k I just want more power out of my car, I know im not going to go get bigger injectors or a bigger turbo is this really worth it – will I notice? Is it reliable? What kind of power will I expect (kw/HP)?

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/
Share on other sites

Hi all,

Ive been searching for more power from my r33 with basic mods such as 3" exhaust, fmic, pod etc. My Tuner has recommended the ViPEC ECU with a tune plus the needed upgrade of a new fuel pump which is old and warn. Plus a boost increase from 0.7bar – 0.9bar.

The quote was for around 3.5k I just want more power out of my car, I know im not going to go get bigger injectors or a bigger turbo is this really worth it – will I notice? Is it reliable? What kind of power will I expect (kw/HP)?

Is that including the ViPEC and the fuel pump? If so, that's not a bad price. You might be able to go a bit cheaper if you sourced the parts from elsewhere. Or you could try to find a secondhand Power FC from somewhere, but I've always preferred to use whatever ECU my tuner recommends.

You will notice a difference though, it's definitely worth it.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961454
Share on other sites

Is that including the ViPEC and the fuel pump? If so, that's not a bad price. You might be able to go a bit cheaper if you sourced the parts from elsewhere. Or you could try to find a secondhand Power FC from somewhere, but I've always preferred to use whatever ECU my tuner recommends.

You will notice a difference though, it's definitely worth it.

Yeah mate that price is every thing fuel pump, ecu, tune & installation.

But before i shell out 3.5k i just wanted to know will the power be noticeable enough to justify the price/ make me a happy man haha

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961479
Share on other sites

Well that depends on your expectations.

My ECU is still one of my favourite mods that I've done to my car, simply because of the difference it made to driveablity and my fuel economy. It may not give you another 100rwhp, but it gives you a bit more (especially if you're increasing the boost a bit) and it makes what you already have feel a lot better to drive.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961519
Share on other sites

If you arent going to be upgrading the turbo/injectors in the future, i wouldnt bother spending all that money just for the sake of a few rwkw and a better top end curve. On the other hand the vipec v44 is a good ecu and has some cool racing features (anti lag, launch control, flat shift).

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961588
Share on other sites

Great Ecu (LINK G4 as its also known by the original manufacturer) it will allow scope for any mods in the future, if your not going all out it would be a wiser investment to buy a PFC as you will save about 1500 yet make the same power and have the same driveability.

Even the new adaptronic plug in select ecu would be a good investment for basic mods.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961606
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961633
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

When did he say he has a Neo engine????

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5961922
Share on other sites

As you have a Neo engine you could get a Nistune chip and get much the same results. You will not really get the benefits of the Vipec over the Nistune if you are not planning to upgrade the turbo etc. You should probably still get a new fuel pump as an insurance against failure.

r33 non neo.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962001
Share on other sites

you can pick up a Second hand PFC for around 1000$..but before you do anything just replace your fuel pump (and filter if its old) and maybe get your injectors cleaned, this alone can make a huge difference, especially if your old ones are shagged..

Unless you got money to burn I wouldnt bother with that Vipec mate

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962270
Share on other sites

I disagree.. Go an pay to get the vipec and the fuel pump... Dont go half assed about shit an get a nistune, Pfc, safc etc... Vipec is one of the best ecu's on the market..

Because in the end you end up wanting more, then you'll start changing this, then changing that.. Take my advice an buy the vipec ecu, you cant go wrong...

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962291
Share on other sites

did the quote come with a price break-down? ie, what the ecu component is worth?

you might find getting a Link G4 from NZ is cheaper than the aussie G4

but definitely have a look in the for sale section for second hand PFC's

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962393
Share on other sites

Sorry must have dreamed the bit about the GTT

Still think Nistune with an appropriate ecu swap is the best value for the OP but Link from NZ is NZ$1895 so even with a temp sensor and postage it will be well under $2K

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962552
Share on other sites

did the quote come with a price break-down? ie, what the ecu component is worth?

you might find getting a Link G4 from NZ is cheaper than the aussie G4

but definitely have a look in the for sale section for second hand PFC's

Yes it did the vipec ecu was quoted at $1800.

how many hours is the car usually on the dyno for ive been quoted 6 hours? does that sound about right ive never had a tune before.

Link to comment
https://www.sau.com.au/forums/topic/373705-vipec-ecu/#findComment-5962850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...