Jump to content
SAU Community

Recommended Posts

I am looking for feedback from people about what clutch they run, what power they put through it, the price they paid and how they like it.

Im currently running Exedy 3 puck ceramic, with 290rwkw, i paid 700 when i bought it about 1 year ago and its a pain in the ass to drive on the street but had good bite

Im looking at a Exedy Sports Tuff Organic this time round...

Link to comment
https://www.sau.com.au/forums/topic/37383-the-clutch-thread-feedback-please/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

OS Giken twin plate, unsprung centre - approx 320rwkw.

excellent bite, easy to drive on the street, not too heavy. I can drive this quite easily in traffic too. Easy to launch, as you can load it up then feed it out as you leave the line.

it was necessary to have the car tuned where the initial bite is, so you dont have to pick up the revs and dump to get off the line cleanly - but a few minutes of tweaking and its perfect to take off nice and smooth.

not sure how long before this wears off.
It doesn't, I've had my Exedy Sports Organic clutch in for around 10,000+ km now and it still shudders.

Actually i'll be back at the shop tomorrow that fitted it getting new gearbox/diff oil along with checking out all the clutch hydralics just to see how everything is going. I've got a feeling that it won't last me till the end of '04 because I frequent the local drag strip (drop it from 3,500rpm around 10x per meeting).

Hi raist60, we use OS Giken, twin plate in GTST's and triple plate in GTR's. Once you get used to the rattle when the clucth is dissengaged, they are great. Never slip, not heavy to operate and easy to modulate.

Sydneykid - how much are they worth? what kind of power do they handle?

What would you recommend for my 33GTR with about 270kw @wheels?

I have a heavy duty excedy and it shudders sometimes when taking off slow

tip for those with these clutches: when taking off slow try to give it as little rpm as possible, i find this helps stop the shudder, when you give it a few too many revs, (not launching) it shudders.

Hi ferni, about $3K and a twin plate would be OK for your power levels in a GTR. I don't bother with a triple plate in GTR's until we get over 350 rwkw.

As for how much power? Not a straight forward answer. In a GTST we have over 400 rwkw on a twin plate, no problems. It simply doesn't have enough traction to cause clutch issues, spins the wheel instead, even on R type tyres. A GTR with more than 350rwkw would need a triple plate though if it had T type tyres. I have used a triple plate up to 600 rwkw, where the gearbox became more of an issue than the clucth. A quad plate becomes necessary according to some people over 600 rwkw. I don't have a 1,000 bhp engine (yet) so I have no experience at that power level.

There is of course more than 1 type of OS Giken multiplate clutch. We use the "race" style which has sprung centres, but no anti rattle pressure/intermediate plates. There is solid centre "race" style as well. And sprung centre with anti rattle, which would be good for a road car. They are only slightly different BHP ratings.

Hope that answers your question

There is of course more than 1 type of OS Giken multiplate clutch. We use the "race" style which has sprung centres, but no anti rattle pressure/intermediate plates. There is solid centre "race" style as well. And sprung centre with anti rattle, which would be good for a road car. They are only slightly different BHP ratings.

What would you suggest for a street car (my gtst) that gets its arse caned every other drag meet - slipped from 5-6krpm regularly - and generally smashed and abused at every possible opportunity?

Adrian

P.S. That car's your hero? What is it?

What would you suggest for a street car (my gtst) that gets its arse caned every other drag meet - slipped from 5-6krpm regularly - and generally smashed and abused at every possible opportunity?

Adrian

P.S.  That car's your hero?  What is it?

Hi Adrian, I would go the twin plate with sprung centres and anti rattle.

PS; Apexi V-max R33 GTR, 8.8 at 165 mph, has AFM's, Power FC and runs 9.3 to 1 compression ratio.

shouldnt it be runnin a bit faster at 165mph? like 8.5?

Your right, typo by me, it was 8.47 at 165.75 mph to be precise at 2 bar. On the same day it ran an 8.8 at 155 mph at 1.85 bar. But that's not why I like it, it's because one car, on its own, kills off so many myths. It says you can;

1. Run AFM's and be as powerfull as cars without AFM's.

2. Run a Power FC and be as effective as cars with all sorts of far more expensive ECU's

3. Run 9.3 to 1 compression ratio and make over 1,000 bhp

There are plenty of cars that are evidence of one or two of these, but in this one, single car the 3 biggest myths in Skylines are killed off. Bottom line, it proves this to all those sheep who follow the line, removing the AFM/s, dropping the compression ratio and sticking a map sensor driven ecu in it is the only way to go fast.

Now you know why I like it.

I use the Just Jap 5 puck ceramic with the sprung centre. Drives mostly like standard except reverse parking up a hill when it shudderd a bit and can rattle when disengaged in those cases.

Good take up, not too hard and will bite enough to chirp third pretty hard on standard boost. Being ceramic, on a hard launch, even as you ride it it will take up very suddenly after a little slip and away you go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...