Jump to content
SAU Community

Recommended Posts

Fixed! haha- aint no AWD-style understeering shenanigans here!

Wow did i mishear that? not inconceivable with all the engine noise and tyre screeching :P

oh and love your work Eric, pretty smooth and very atypical of a yank to downplay their work "oh btw heres a few random pics" and then bust out some of the most awesome pics i have ever seen from a track day.

Marulan is especially hard to get good shots from unless your prepared to go bush and hit some of the far corners of the track, you got some great shots of Skylines doing what they were made to do. Looks like there is a 33gtst s2 just like mine there too, at least on the dry day that you went?

Never driven there in the wet but had a few wakefield days while it was raining and for all the fun i find it far too unpredictable (and im not the only as evidenced by your blooper reel) whereas on a dry track you can really hone your skills and find out what the car is capable of.

Thanks for the heel and toe lessons but nothing beats practice, practice practice!

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Also, further to Duncan's post, learning to correctly heel-and-toe early before you get into a corner will help with engine braking, taking some of the pressure (and therefore heat) off your brakes.

I find i like to use the extra engine braking caused by the spin up of the motor when i don't heel/toe (of course easing the clutch out so avoiding compression lockup of the rears) and I still get the regular engine braking you're talking about from the closed throttle.

I guess the only way to interpret this however, is that my brakes are too front biased, because I reckon my way of doing it gives me better overall stopping. If the brakes were better balanced the non-heal/toe would cause compression lockup on the rears.

Yep, wrong way around Dave, original post fixed ;)

Jarrad, almost certainly that noise is your gearbox thrust bearing. A bit of noise from it is no issue, just replace it when you get the clutch done. It may have been brought on by the day but it isn't urgent to address.

Adam, spot on, if you are using compression braking and find it helpful, you should have more rear brake bias. It's really just a bandaid for something wrong in the barke bias (because a foot brake will always be more effective and consistent)

BTW Eric....always have 2 hands on the wheels when you are planning a spin :P

is that expensive duncan??

pretty much determining weather to join the wakefeild day on how much itll cost to fix it.

You don't fix it until the clutch dies.

Most R32 and R33s have the same noise, just keep driving until you need a new clutch itself.

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

dude, i've got some you can fry. these guys still haven't picked up the stockies at my place so i've got 6 lying around. more than welcome to use them.

The GTR lives!

just got it back from CRD about 10 minutes ago and proceeded to drive it very sensibly with out any sort of erratic or unnecessarily vigorous acceleration all the way home causing very little noise pollution in my neighbourhood. Or the exact opposite of that, I'm a little hazy on the details.

Apparently it blew one of the boost pipes off and just blind sided the ecu's ability to tell how much air was actually going into the engine, hence the epic over fuel.

Anyway, good to go for the next track day!

The GTR lives!

just got it back from CRD about 10 minutes ago and proceeded to drive it very sensibly with out any sort of erratic or unnecessarily vigorous acceleration all the way home causing very little noise pollution in my neighbourhood. Or the exact opposite of that, I'm a little hazy on the details.

Apparently it blew one of the boost pipes off and just blind sided the ecu's ability to tell how much air was actually going into the engine, hence the epic over fuel.

Anyway, good to go for the next track day!

great news Matt...you owe me a proper ride in that beast! Seriously, the flames coming out of the exhaust when i followed you in to Picton were epic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...