Jump to content
SAU Community

Recommended Posts

It does look like a small actuator ill prob have to buy a bigger 1 u think??

Yeah, well, you see those small can actuators were giving troubles to the owners - wouldn't hold boost, etc. Large can actuator is only available in 18 psi spec, but is better in keeping WG flapper shut.

Added: You should possibly do a lil bit of search about "big can", one of the results of that search would be this thread

Edited by Legionnaire

i dunno but my guess is still on the AVO .73 housing..possibly being sold under a diffferent name..

As far as i know it is the only GT30 housing available that bolts up to the skyline dump pattern

http://www.avoturboworld.com/pdf/gts_exhaust_housing.pdf

http://www.skylinesaustralia.com/forums/topic/279600-more-thoughts-about-the-rbvg-gcg-hi-flow/page__st__20

That is the mtq sonic performance housing. Even they dont know what size it is.. They say .75 in one place and .76 in another on the same page..

I fear this will be another AVO job, and it probably comes from the same supplier.

Look here:

http://www.sonicperformance.com.au/739548_dash_RB20_dash_25/Nissan-RB20_or_25-Ball-Bearing-Upgrade/pd.php

803712-5001 is turbo part#,

112101-11 is the serial#,

That actuator is a Garrett number and is a GT28 1bar actuator (14.7psi), also looks like its missing a locking nut for the rod end.

Housings definately not garrett. Have had customers come back to me with stories of those type of housings being too small and causing boost creep, so we swapped them for garrett 771300-10 housings 0.82 int. gated 5 bolt outlet (same as XR6s) and that solved the issue. But obviously would of needed to mod dump pipe with matching flange to suit lol. Does look like an AVO housing but can't confirm, have you had a look on the inner edge of the housing inlet? the a/r size is sometimes stamped there. On garrett units they are.

Edited by OoskylineoO

just looked all over it and there is no numbers unfortunately :ermm:

so why dont these housings flow if they are supposedly bigger than the .63 but smaller than the .82 in theory wouldnt that be a good happy medium between power and response?????

Im lost :wacko:

803712-5001 is turbo part#,

112101-11 is the serial#,

That actuator is a Garrett number and is a GT28 1bar actuator (14.7psi), also looks like its missing a locking nut for the rod end.

Housings definately not garrett. Have had customers come back to me with stories of those type of housings being too small and causing boost creep, so we swapped them for garrett 771300-10 housings 0.82 int. gated 5 bolt outlet (same as XR6s) and that solved the issue. But obviously would of needed to mod dump pipe with matching flange to suit lol. Does look like an AVO housing but can't confirm, have you had a look on the inner edge of the housing inlet? the a/r size is sometimes stamped there. On garrett units they are.

basically because they were never really designed to have garretts 60mm turbine wheel stuffed in them, they have been modified to suit..

So while it does work it is not ideal...

what you stressing about anyway just put it on and enjoy, you can always change it later on down the track, hell i may even buy the housing off you if the price is right...lol

ARTZ why buy his housing when you already own the ultimate turbo :P HG has put 3576 cores in stock 2iu housings, how many times must I tell you the 2iu isn't even half your problem.

As for the avo or sonic comment, I think I pretty well covered that it looks the same and possibly could be from the same factory but rebranded (avo's rights must have expired and China found new places to sell its products)

The problem is exactly as said above, they are actually made for the stock turbo. They are ok when using a gt28 core or similar but the gt30 60mm is probably a little too big for their design.. Ive touched on it already, id probably prefer a 2iu or op6.

Ask mtq to swap it for the Garrett .82 and pay the difference if u have to, its still new.

Whats a garrett housing worth? and the labour costs involved in changing the housings?

ARTZ why buy his housing when you already own the ultimate turbo :P HG has put 3576 cores in stock 2iu housings, how many times must I tell you the 2iu isn't even half your problem.

As for the avo or sonic comment, I think I pretty well covered that it looks the same and possibly could be from the same factory but rebranded (avo's rights must have expired and China found new places to sell its products)

The problem is exactly as said above, they are actually made for the stock turbo. They are ok when using a gt28 core or similar but the gt30 60mm is probably a little too big for their design.. Ive touched on it already, id probably prefer a 2iu or op6.

Ask mtq to swap it for the Garrett .82 and pay the difference if u have to, its still new.

garrett housings about 400-600$ and its only a few bolts you should be able to change it yourself if you can use a spanner..but you will also need a new dump, not sure how much they are..

GTScotT is right I dont want it, I have Kando power now..lol.. Dont worry just put it on your car and see how it goes, it will be great..chances are you will have other bigger problems than the housing anyway...just get it working first

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...