Jump to content
SAU Community

Recommended Posts

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

if i can get this footage to actually work it probably wont give you a good idea lithium as i was sitting on 4-4500 before i could give the accelerator a hit

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

The vid actually tells very little in general, looks quite laggy in 2nd gear (though you say its not necessarily full throttle?) and breaks loose a bit in 3rd. Seems like it must go ok though, take it to the strip and point a camera at the dash :D

Yeah prob not the best video lol yeah hit bit of a dip in the road in 3rd and it started to squeal i dont think it feels that laggy in 2nd tbh and yes i will hit the strip so i can do a decent in car video.

Just spoke to my tuner and the engine light popped on because i was about to hit the rev limiter and thats the links little warning telling you you are about to get cut so thats a relief :blush:

The thing I'm most interested in is where it starts building power etc, its clear that with >20psi and E85 its going to make good power - that was never the question. I'm more interested to see if its equal to or any better than a regular GT3076R in normal usage.

Yeah that's what i wondered... My tune will be E85 and probably 20psi with the 3037-56T but would be interesting to see how different it would be with the GTX3071r as a back to back comparison... Maybe one day i'll do it but for now ill concentrate on just getting my car to run >_<

What r u guys complaining about, it looks fast enough (4500rpms to limiter) for me to jizz in my pants, does look real fast, that zone. But I understand the first half of the rpm band was slow as cos he wasn't flooring it as above?:rolleyes:

Interesting. My link doesnt flash a warning when i hit the limiter. It does if you bash the MAP limit however :)

Maybe its a setting.

I think you should take a few more videos like that one.

Do this:

2nd from 2000rpm

3rd from 2000rpm

4th from 2000rpm

Quite keen to see the difference in real time recordings between the GT and the GTX

I have a video quite similar to that one you just posted. Dont know if Lithium or myself have already posted it? (Normal GT30)

Yeah cpouldnt floor it when i wanted cos there was a truck in front of me so had to let him pull a gap and a falcon coming the other way that looked like popo from a distance :whistling: so didnt step on it till 4500 really

What r u guys complaining about, it looks fast enough (4500rpms to limiter) for me to jizz in my pants, does look real fast, that zone. But I understand the first half of the rpm band was slow as cos he wasn't flooring it as above?:rolleyes:

My tuner told me that it will flash for 3 reasons nearly hitting the rev limiter, boost cut if it over boosts and temperature which is how mine is setup apparently.

I will do some more in car vids when i can actually get on it harder..... Hopefully this shitty weather pisses off it looks like its gunna storm out my way soon.

Interesting. My link doesnt flash a warning when i hit the limiter. It does if you bash the MAP limit however :)

Maybe its a setting.

I think you should take a few more videos like that one.

Do this:

2nd from 2000rpm

3rd from 2000rpm

4th from 2000rpm

Quite keen to see the difference in real time recordings between the GT and the GTX

I have a video quite similar to that one you just posted. Dont know if Lithium or myself have already posted it? (Normal GT30)

I ditched the boost gauge my profec is my boost gauge :whistling: but i will do my best to get some more footage as soon as possible as long as the weather holds out for me

Profec is good, because you can show a peak hold value!

So load up in 4th from 3000rpm with camera on tacho, then when you hit 1bar back off and show the profec peak reading!

For science :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...