Jump to content
SAU Community

Recommended Posts

They are slow. Turbo skylines which are stock as a rock are also quite slow but still not bad for a small turbo motor. There aren't much for the price you can get which are quicker. A slightly boosted turbo skyline with the basic mods(exhaust and probably cooler) is faster than a BMW M3. I had about 180rwkw when I was stock and I managed to get ahead and infront of the M3 bmw V8. Just enjoy the car.

When you are able to get a turbo, you will love it. A skyline with greater than or equal to 200rwkw is a very fun, nice, powerful and fast car.

Love the video above, not many 2.0NA motors can do that!

Naah, or he really wasn't trying..

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Naah, or he really wasn't trying..

He was screaming his ear off, my mum was in the car hitting me to slow down. Happened. True story. My old skyline which made 225rwkw would absolutely tear them in half.

Only a GTST, and those I6 M3's are better than the V8's. Doesn't take much more than a little boost to be quicker than them. Top end they have it with their larger displacement motor but down low, we got bigger torque and enough power to get infront.

Edited by SargeRX8

hmm well when i call a car a boat i refer to the sway it has when cornering and the poor cornering performance, from what i have herd the R33 has this issue stock but can be fixed with suspension n other goodies.

I just sold my R31. Shortly after I test drove an n/a 33 and it handled terribly compared to my 31, and it was also slower (and lacking in the torque).. n/a 33 would have to be the worst n/a skyline you can get in terms of performance, so yes your car is a boat, and yes, your friends 04 camry will obliterate it if you guys have a full heckers mad dog street race..

My boat has whiteline sway bar, bilsteins with king spring, and front and rear strut bracing, it handles great, has a slight touch of understeer mid corner which can be fixed by the accelerator pedal

He was screaming his ear off, my mum was in the car hitting me to slow down. Happened. True story. My old skyline which made 225rwkw would absolutely tear them in half.

Only a GTST, and those I6 M3's are better than the V8's. Doesn't take much more than a little boost to be quicker than them. Top end they have it with their larger displacement motor but down low, we got bigger torque and enough power to get infront.

M3 Evo ~320 at fly, mine made 255rwhp.

You say 180rwkw ~ 241rwhp? When stock? Lies. Stock ones would make about 180rwhp...

In any case, V8 M3 is 414hp @ fly ~ 350rwhp.. no chance especially in a straight line... (Source)

at the end of the day, in non turbocharged form the RB is a moderate revving, small displacement, low static compression ratio engine in a moderately heavy car.

They were never going to be bastions of warp like acceleration, but that's ok it's not what they were built for.

If its one of the newer camry's it would chop your NA R33 lol.

Lol that it would. Refer to the other R33/R34 NA Gutless thread.

How slow is the 0 - 100km/h for a N/A R33? They got to be dam slow to be slower than your granny Camry...

My mum's 02 model takes 10.4 seconds for 0 - 100km/h & it is the 'slightly' more powerful V6 version.

So I can't see how the current ones would be better, since they are all 2.4 4 cyls now & are heavier with each generation with all the extra electronic & safety crap added. If anything one of the older models with a 5 speed manual would probably be the fastest one out of the bunch. This was the case with the Corolla my dad bought (06 model) which was slower in the acceleration department compared to the last gen, due to the fact that it has gain extra weight (for extra safety stuff) without much increase in engine power/torque.

Out of all your typical boring sedans (Accord, Mazda 6, 6 cyl falcodores etc etc) I find the Camry has one of the worest 0 - 100km/h time. Only thing slower on top of my head is the Great Wall X240 (which is not a sedan) which clocks in at 20 seconds :rofl2:

Edited by Mayuri Krab

na skylines are weird.

the 33 i had felt slow and sluggish where as my 34 isnt too bad for an na, drove my friends 25gt and my car was much much faster. maybe slash your friends tyres, or undo his wheel nuts

im joking about the wheel nuts and tyres.

na skylines are weird.

the 33 i had felt slow and sluggish where as my 34 isnt too bad for an na, drove my friends 25gt and my car was much much faster. maybe slash your friends tyres, or undo his wheel nuts

im joking about the wheel nuts and tyres.

That's because the R34 has infinately variable valve timing (intake only) and a variable length intake manifold.

Therefore a much better torque spread across the RPM range.

but why is my r34 so different to my friends :mellow:

Few possibilities.

- Possibly his variable length intake actuature (it actually looks like an actuator for a turbo) could be faulty. it's located on the middle section of the "Y" pipe - vacum leak will cause the actuator to stop working or work intermittently, causing sluggish low end performance.

- Any vacum leak

- Dirty air filter.

- Dirty AFM

- 02 sensor could be getting too old

- Poor quality fuel

- Timing out

- Auto trans slippage

- His car may have done higher KM's

- Engine oil too thick

- Low tire pressure

M3 Evo ~320 at fly, mine made 255rwhp.

You say 180rwkw ~ 241rwhp? When stock? Lies. Stock ones would make about 180rwhp...

In any case, V8 M3 is 414hp @ fly ~ 350rwhp.. no chance especially in a straight line... (Source)

What makes 180rwhp? My stock turbo skyline was making 193rwkw on 12psi and is a very quick car. How much does the M3 weigh? It is a fairly big car. Both my skylines produced more torque also. In that graph that V8 is making 259ft pounds of torque. My old skyline made close to 320ft pounds and the current one is pushing more than 500ft pounds. I'm sitting on about 700nm and that is out of a small 2.5L 1.3 ton car. And I don't just peak that torque

Few possibilities.

- Possibly his variable length intake actuature (it actually looks like an actuator for a turbo) could be faulty. it's located on the middle section of the "Y" pipe - vacum leak will cause the actuator to stop working or work intermittently, causing sluggish low end performance.

- Any vacum leak

- Dirty air filter.

- Dirty AFM

- 02 sensor could be getting too old

- Poor quality fuel

- Timing out

- Auto trans slippage

- His car may have done higher KM's

- Engine oil too thick

- Low tire pressure

hmmm. could just be a lemon

What makes 180rwhp? My stock turbo skyline was making 193rwkw on 12psi and is a very quick car. How much does the M3 weigh? It is a fairly big car. Both my skylines produced more torque also. In that graph that V8 is making 259ft pounds of torque. My old skyline made close to 320ft pounds and the current one is pushing more than 500ft pounds. I'm sitting on about 700nm and that is out of a small 2.5L 1.3 ton car. And I don't just peak that torque

Yeah you aren't making 700nm of torque.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...