Jump to content
SAU Community

Recommended Posts

ok so the common problem people have with c34 stageas and turbo timers is when the lights are on auto and the turbo timer is on and u get out the lights dont turn off even when u open the door you must wait till the car shuts down then open and close the door very anoying.

The easiest fix is put a relay on the earth wire {black wire} to the auto lights module behind the instrument cluster and hook it up to the ignition so when the turbo timer shuts down the lights go out no matter what. i wired mine up that way 1 week ago and works great.

i even covered the sensor on the dash with a black sticker so the lights are always on when i am driving looks better and safer

parts needed 5 pin relay

female spade terminals and crimper

screwdriver

test light or multimeter

relay pin 30 cut earth wire from auto light module

pin 85 ignition

pin 86 earth

pin 87a other side of cut auto light wire

have fun

post-23888-0-71354100-1315553269_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/376688-c34-auto-lights/
Share on other sites

Yep the cluster needs to come out and the box is just behind it held with one screw I don't have a photo of the relay that I put in but just get a normal automotive change over relay and follow my instructions and u can't go wrong

Link to comment
https://www.sau.com.au/forums/topic/376688-c34-auto-lights/#findComment-6008640
Share on other sites

Weird I've never been in one with out it.... (Been in over 10)

Personally I wouldn't put tape over the light sensor on the dash either as this is also used by the climate control unit.

The sensor on the Passenger side is for the climate control, driver's side, auto lights.

Link to comment
https://www.sau.com.au/forums/topic/376688-c34-auto-lights/#findComment-6024977
Share on other sites

  • 2 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...