Jump to content
SAU Community

Recommended Posts

A missing 1 x 4 point power board.

Had the following details on the back;

Al

Skylines Aust.

0427 076490

So if anyone comes across this can you please use the details and give me a call :).

PS: JAMES you stole my thread title :D:(

Was about to start a thread for missing items and ANYONE THAT IS OUT OF POCKET WHILE CONTRIBUTING TO THE SAU STAND.

I strongly feel that one person (or a couple) should not carry the financial burden for helping the entrants at SAU. So if anyone is out of pocket please post you costs, so we can tally these up and devide the burden amounst all entrants (and donators :D).

These include:

- Missing TV remote (if this is not found, James will be held reponsible, by the rental company, to replace it)

- Missing SAU T-shirts (Hopefully we have a bunch of honest SAU members)

- Alcohol (I have been fully reinburst, but Ash and others may be out of pocket)

- Anything else that contributed to a great SAU stand.

Also... must send a thankyou to Lindsay Fox for the race-car.

Thought it might be nice to get a big print out of the photo with everyone around the R32 and all sign it? The photo that was up yesterday was great - but a little too low res. Is there a higher-quality version?

i think something needs to be done to thank sameer and his family for the constant use of their house also.... perhaps we all chip in for a nice bottle of "insert incapacitation liquid name here" :D

  DJ_L3ThAL said:
ash i think anita has the red polo, or did she give it back b4 she left? prolly in your car den :)

Nah dude, that was hers to keep.

It was all paid-up for etc a few weeks back

And her's was a small anyhow. Not a Medium :D

what is with you and wearing chicks clothing, first you wanna enter a bikini contest... now this...

as for memory card. I put it in Ash's centre console while you're car was on the dyno james.

the HPI mags are James' I think.

we have to organise a meet.

i've let j-spec know bout the return of favour for the sponsorship. this will either work out as a monetary reimbursement or payment for a future event.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
  • Create New...