Jump to content
SAU Community

Recommended Posts

I have a question regarding E10 fuel.

Now i know that its a blend of unleaded + %10 ethonal and is a lower Octane rating , but i have been searching on the net and discovered the following at "Freedom Fuels" which actually has 3 diferent types of E10...

E10 Unleaded (91)

http://www.freedomfuels.com.au/index.php?option=com_content&view=article&id=15&Itemid=20

E10 Premium (95)

http://www.freedomfuels.com.au/index.php?option=com_content&view=article&id=16&Itemid=20

E10 Hi Octane (98)

http://www.freedomfuels.com.au/index.php?option=com_content&view=article&id=17&Itemid=20

So my question is that would it be ok to use the E10 Hi Octane as its equivelent to 98 proof premium unleaded?

Regards,

Darren..

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/
Share on other sites

Any E10 is safe to use and the higher octane the better.

For highly tuned engines the problem is the same as with E85 although on a smaller scale - namely that the actual ethanol content and rating of the fuel can vary which matters when your engine is tuned to the outer limits. For such engines the way forward seems to be the "flexi" approach where the fuel quality is sampled by a special sensor before it reaches the injectors and an adjustment made automatically through your Link, Vipec or other high performing aftermarket ecu.

However for stock or less modified engines the difference particularly with E10 should not be significant.

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6031856
Share on other sites

I'm using the United Premium 100 fuel, which has become available again at my local servo. 100 octane E10, and my car seems to run better on it. Always had good results when running it in the past.

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6032149
Share on other sites

Does it cost extra? If the car is tuned on 98 octane fuel, will it be fine switching to this? Are there any risks of running this octane stuff? I have heard alot of stories of the ethanol ruining old components in the fuel setup, corroding shit, etc. Sure these cars run now but is there any negative long term effects

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6032637
Share on other sites

so United sell e10 100 octane...might have to check that out and put 1/2 tank in when empty to see if there is a diference between that & vortex..

Thanks for the input guys, would love to do e85 but there isnt much around and cant afford more injectors presently but but the e10 may helpp a bit....

How does it vary in price to the 2 premuim brands & what the economy like guys?

Regards,

Dazza

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6033083
Share on other sites

I find the 100 to be similarly priced to Ultimate.

I think the E10 does corrode in older cars. R31s are on the list of cars that cant run E10 (without upgrading the fuel lines), but modern cars are fine.

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6033093
Share on other sites

I find the 100 to be similarly priced to Ultimate.

I think the E10 does corrode in older cars. R31s are on the list of cars that cant run E10 (without upgrading the fuel lines), but modern cars are fine.

uh oh, i think thats all that my gf's 31 ever gets :(

on topic, i run the e10 95 in my stagea (way cheaper than the 98 we get here) and it runs pertty well (rb25 neo)

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6033808
Share on other sites

Funny, I remember it being in one of those government pamphlets when E10 first came out as being on the 'do not use' list. Maybe it was just paranoia on their behalf? I never bothered to double check it, just didn't use it.

Link to comment
https://www.sau.com.au/forums/topic/378246-e10/#findComment-6034838
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...