Jump to content
SAU Community

Recommended Posts

this may be the wrong place to post this thread i apologize if so.

i am currently on my l plates with 2 weeks to go and am currently looking into purchasing a r33 gts or a r32 gts. i am looking at around the 10 - 12 k mark. no turbo as im not one to want to risk my wallet for a turbo.

i was just wondering what everyones thoughts are on the n/a skylines?

do you believe it is worth investing the money on a n/a model or would you suggest waiting the 3 years and then experiencing the full power of a r34 gtr?

just really wanting some second opionions about to spend the money now on a n/a as just really a streat cruiser that you can just increase the aesthetics with small engine mods and exhaust. or to wait and get a 34 gtr in a couple of years???

also who do you believe are the best insurers as i have got a couple of quotes averaging around 3k comprehensive.

thanks

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Hi Ethan,

Welcome to SAU!

Other than your insurance Q, the others are very subjective and you'll get a whole array of responses.

I'd go with your gut feel > don't rice it up; use genuine parts or exact copies if you want to go for a cosmetic makeover > take care of the car > come to some of our events > check out the forums here > do advanced driver training courses = on the right track towards a gtr

With grey imports, your insurance choices are Just Car, Lumleys SV, Shannons (but you may not be old enough), NRMA (which often does not give a very good 'sum insured')...

Cheers, T

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6033264
Share on other sites

Hey mate,

From what I've HEARD NA skylines are the slowest things on the road. So it all depends on what your looking for in a car. As for moding it I've also HEARD it's illegal to do any modifications while on your ps, ofcoarse everyone does but maybe something to look up seeing as you like your money in your wallet as you've said :) smart man.

As for buying a 34 Gtr, i myself owned a 3000 dollar camry since I was 16, I'm now 20 and got my skyline 4ish months ago when I got my blacks. And the '88 camry may have let me down once with a dead battery hah. So having a small car although is very boring, can save you alot of money, you can park it anywhere, treat it like crap as a fee times the camrys oil has run DRY haha. So it depends on what you can afford and at the end of they day what you'll be happy with. If you buy a skyline now opposed to a run around you may not be able to afford a Gtr because of petrol or mods or theft.

But what ever you get do what Terry said above come to events and learn how to drive, it's helped me alot so far and is so much Fun!

I hope this made sense, I just woke up hah.

Jarrad.

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6033360
Share on other sites

i did it.. had a ball, slapped on a turbo and am now going to be doing a 3l bottom end.. It will cost you alot of money if u cant wait and start modifying it.. I could of bought a nice 34gtr but meh

If your plan is to keep it and go the same route as me get a 34 as it already has things like 5 stud, better head etc

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6034325
Share on other sites

I was going to make the suggestion, if you want to buy an NA, buy an R34 one. Don't waste your time in the 32/33 camp. The 34 in the cabin is a much better car.

In saying that, I'd also look at what you're going to want to do in the near future. Personally, I love the fun of getting away with a bunch of mates, throwing a bunch of gear in the back of a car and heading for some fun out bush, where know most P plates that are into cars, you'll have some fun in paddocks etc and just flogging the car around. For example, heading up to nelsons bay etc, you can actually legally drive on the beach... I wouldn't try that in the Skyline...

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6034365
Share on other sites

If your on your Ps get whatever NA that you like the look of which won't break the bank, don't do any powermods or rice it up as you will throwing money down the drain for minimal gain.

If later on you want power then get something already done up the way you want it later on and save 10s of thousands of dollars.

or if your rich or stupid buy a stokers and modify it to within a inch of its life, me, I was stupid, LOL.

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6035024
Share on other sites

Id go the 34 non turbo as Matt said

and as Mark said dont go power mods on an NA line

if you get some nice suspension parts and brakes - its a fun car to drive and great to learn on especially if you do some defensive driver courses - and honestly - do a few driver courses - thats the best modification :D

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6035046
Share on other sites

and a vtec??

what do you guys think about a na supra with a 2jz gte in it??

An NA Supra with a 2JZ-GTE in it is no longer an NA Supra.

If it has a 2JZ-GE in it, then it's a different story. You can even drive it legally on your P's! WIN!

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6036710
Share on other sites

and a vtec??

Actually, a really nice 5th generation Prelude VTiR (despite being FWD) is a great car. Get into Prelude Aust forum > F/S and take your pick with $8K in hand.

And when you come back on here at SAU, just adjust your User Name by removing the letters "N-a-s-T-R" :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6036741
Share on other sites

This is some good advice mixed in here. First even though it seems like a long time off getting through your P's isn't that long. As Aggroman has said, he could have bought a much nicer car for what he's put into his car. A typical build up of a car while you use it as your primary driver vehicle will take a couple of years.

What Aggro isn't telling you is that he's cut most of the cost on his build by doing the work himself. He has countless hours into the car which if you were paying a shop would pay for a GTR a couple of times over.

Each car will have it's limit in capability. So if your aim is to have a decent modified car always start from the best base that you can. But unless you are really good at planning your modifications and have the $$ to back them, odds are that you will end up with something less optimal than a car that started out as a good performer with some small mods.

Get a decent NA car - the more displacement the more power but also less fuel economy. You need to figure out your budget and match. My son's friend has just gotten an NA supra. Decent car for the money, just a bit heavy (look who's talking about heavy hehe).

My two schools of thought are if you want a fast car start as light as possible. It is much easier to make a light car quick (as in zippy and fun to drive). MX5's, 180's and hot hatches are all light with a reasonable amount of power and can be very fun to drive. Or if you are addicted to the "Raw power" sensation there is nothing like the feeling of a lot of horse power. But usually it's the bigger heavier cars that have donk's with the potential for bigger power. But your ability to translate the power around corners is limited by the weight and handling of the car. So really it all depends on what you want to do.

Quick = power -vs- weight so some hot hatches or small imports will do better if you want quick

Fast (as in top end speed) = power, which for NA engines is displacement and efficiency

Link to comment
https://www.sau.com.au/forums/topic/378355-buying-a-r33/#findComment-6038525
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...