Jump to content
SAU Community

Recommended Posts

Hey All,

Decided to post up a build up thread of my RB26.

Just to mention all of the work on this rebuild is done by GTRsean ( My house mate) who knows his sh#t when it comes to rebuilds! thanks.gif Sean

Where as I have never done this sort of thing before.... lol

So as this is underway I'll try to watch, learn and help where I can to get a better understanding as to how this all comes together.

A bit of history on the vehicle itself.

I am the second Australian owner of this 1993 BNR32 and have owned it for about 2 years.

It was purchased on the Gold Coast back in late 2009.

The previous owner had owned it for 6 years and bought it from a dealer.

Here is a photo of the ad for it.

post-39868-0-29012100-1317523671_thumb.jpg

and a photo of when I picked it up.

post-39868-0-58857700-1317523677_thumb.jpg

During my ownership it has seen a change cosmetically and mechanically.

the original plan for my car was to be a clean stockish JDM looking car that had decent power to come with it.

After months and months of driving the car eventually the engine block let go.

This was after I took it to SAU Drag Day this year and managing to put a crack in the 5th cylinder bore.... sleep.gif

post-39868-0-02650300-1317526198_thumb.jpg

I suppose this didnt help either which occurred a few months before.

http://www.skylinesa...lock-from-fuel/

The Mods on the car before the rebuild.

Arias Forged Pistons

Apexi AX53B60 Twin Turbo's @ 21psi

Apexi Power FC /w Hand Controller

Tomei Adjustable Cam Gears

Tomei Master Cylinder Stopper

Tomei Sump Baffle Kit

Yellow Jacket Coilpacks

NGK Spark Plugs

HKS Piping Kit

HKS 264 Degree Cams

HKS Catback Exhaust

JUN Oil Pump

720cc Sard Injectors

Turbosmart T Boostcontroller

Nismo Twin Plate Supercopper mix

Nismo Front Pipes

Nismo Engine Mounts

Nismo 320 kmph Dash

Nismo N1 Skirts & Rear Pods

Z32 AFM's

Oil Filter Relocation Kit

Oil Cooler 18 Row /w Braided Lines

Custom Oil Catch Can

ARC Front Mount Intercooler

Aftermarket Fuel Pump

BC Racing BR Series Adjustable Coilovers

Brembo Calipers and 324mm 2 Piece Slotted Rotors

Front & Rear Sway Bars

Front & Rear Strut Braces

Garrett 30Psi Boost Gauge

Wheels:

Work Emotion XD9's 17x9.5 +17 All Round wrapped in Falken Rubber

Here is a couple of photos of what it looks like.

post-39868-0-38150900-1317524531_thumb.jpgpost-39868-0-84525900-1317524534_thumb.jpgpost-39868-0-59841000-1317524538_thumb.jpg

post-39868-0-06065800-1317524541_thumb.jpgpost-39868-0-61821600-1317524527_thumb.jpgpost-39868-0-19116300-1317524701_thumb.jpg

24 Sep 2011 - Engine is out now and the rebuild begins.

post-39868-0-02221500-1317525067_thumb.jpgpost-39868-0-11299400-1317525107_thumb.jpg

post-39868-0-06805100-1317524971_thumb.jpgpost-39868-0-40305500-1317525019_thumb.jpg

post-39868-0-64900900-1317525766_thumb.jpgpost-39868-0-33444500-1317525780_thumb.jpg

30 Sep 2011 - Bought some stuff to go towards the rebuild.

Cosworth 1.1mm Headgasket.

Nitto Intake & Exhaust metal gaskets

Nitto Full Gasket Kit

ARP Head Studs

ARP Main Studs

ACL Race Big End Bearings

ACL Race Main Bearings

Sonic Turbo Studs

post-39868-0-83849500-1317526692_thumb.jpg

01 Oct 2011 - Bottom End Taken apart.

Stock oil Restrictors

Arias Forged Pistons

Stock Rods

ACL Main Bearings

Stock Big End Bearings

Engine block honed

Found that the engine had a 33 GTR Crank which luckily is still in good nick.

post-39868-0-57889700-1317526676_thumb.jpg

And that's all I have for you folks for the time being.

i'll try to keep this thread updated as much as possible along the journey..

Cheers!

Sloane.

Link to comment
https://www.sau.com.au/forums/topic/378853-sloanes-engine-build-up/
Share on other sites

^^A full rebuild first.

Lol!

So, as Sloane said, I'll be helping him get his car back on the road, and into the 10's :thumbsup:, he has to beat my 12.001 quarter mile time first!

Car is being prepped for engine bay painting, and I made up a booth to spray in (hung up plastic). Primer coat is down, just needs a sand and the silver base coat will go on tomorrow.

post-12712-0-94364000-1318060822_thumb.jpgpost-12712-0-67994600-1318060827_thumb.jpg

post-12712-0-02520100-1318060832_thumb.jpgpost-12712-0-57238600-1318060834_thumb.jpg

post-12712-0-22694100-1318060839_thumb.jpgpost-12712-0-09845800-1318060843_thumb.jpg

Engine wise, it will get the full build treatment, but keeping in budget constraints.

A few things to note with the engine upon pulling it down:

It was the stock 86mm bore, it was just honed when the arias pistons were fitted.

When Sloane had the engine 'fixed' by the last workshop:

Engine out etc:

They fitted JUN oil pump, no oil restrictor was fitted, just the stocker 2.0mm.

They changed the big end bearings due to a knocking, put in stock nissan bearings, mains weren't changed, they were ACL's and had scoring, probably from the first build...

For all that $12,000+ roughly.

The only things that I won't be doing will be block machining, crank balance etc. I need to clean the cylinder head, then send it in to get checked and skimmed.

Yeah tell me about it :whistling:

Just finished painting the engine bay. Put the base coats of silver on then the clear coats after 20mins.

Damn moths and things trying to lick the paint!

Glad I got it done tonight, as I didn't want to paint Sunday as well.

post-12712-0-42776000-1318075383_thumb.jpgpost-12712-0-97011700-1318075387_thumb.jpg

post-12712-0-14037600-1318075393_thumb.jpgpost-12712-0-67128900-1318075398_thumb.jpg

post-12712-0-64244000-1318075403_thumb.jpg

Just have to de-mask some of the stuff.

I'll put up some better pics tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...