Jump to content
SAU Community

Recommended Posts

Thanks guys, very happy with the car as its only mods are Catback Exhaust, Pod filter, Underdrive pulley & a brass button clutch. Will be back for another run when i get some good tyres :)

nemz.jpg

that's a pretty shocking 60' time. some decent tyres will drastically drop that time. brass button clutch probably doesn't help if it bites hard (promotes wheelspin off the line). get the 60' time down to around 2 seconds and you should be running flat 14's.

good time mate! very impressive :)

I still need to try going to a drag strip but as nikk_666 said .. scared the time will be fail. i dont mind anything around 15 though that seems reasonable ... but since itll be my first time at drags im expecting to fail miserably :P

the fun of drag racing isnt in what time you, but the road to getting quicker.

eg my 1st run in the 33 was 19 secs because I blazed the tyres off it in 3rd.

Just get out there for a night, first few runs are generally crap and you will get better.

then once the car (not the driver) cant go any quicker start changing a few things to try and get quicker and more consistnt

Yeah I hope to pop down on the next drag night for some fun, ive been to a few skidpans and had fun with those, the instructor in the car always said i was a bit lightfooted and i could have gone much harder laugh.gif im still learning though so i figured it would be best to go slow and whats well within my control

just didnt wanna embarass the other skyline owners down there on the night with my crappy time laugh.gif

not gna bother modding the n/a skyline past what ive done really, which is good tyres, exhaust and high flow panel filter ...

will prob work on suspension/brakes after but yeah

not gna bother modding the n/a skyline past what ive done really, which is good tyres, exhaust and high flow panel filter ...

will prob work on suspension/brakes after but yeah

yeah fair enough, I still say give it a rip

Go down and have some fun mate, it gets very addictive. Drop your tyre pressures down to 23psi or so, drop the clutch at 4000rpm and let her rip :)

it would appear im noobier than i thought .. i always increased my tyre pressure before going on any skidpans .. why decrease tyre pressure?

thanks for the advice though, i actually have no clue how to do a "racing start" LOL im a granny spec driver ... fml how embarassing to say this on a skyline forum!

ill head down to the drags this coming wed or next for sum lols and post up my times for you guys ... if their <18 seconds .... nothing over, that would just be embarassing to post on a public forum. in fact 18s probably embarassing as well :P

only drop your rear tyre pressure though. pump your front ones right up (unless it's a gts4). letting the fronts down will slow you down.

also, unless you have very good tyres, you are better off slipping the clutch off the line. if you have a heavy duty clutch and dump it it will just fry the tyres. this is why, even in a mildly modded turbo, you will do better times with a healthy stock clutch than a heavy duty clutch. same goes for suspension. stock is better than stiff coil overs

im confused as to whether slipping or dropping is better, i googled it and it seems to be a mixed opinion

some say dropping wear out gearbox

some say slipping wear out clutch

both are true. but when it comes to getting the car off the line cleanly slipping the clutch is better. why do you think f1 cars run a dual stage clutch system?

when we talk about slipping the clutch we basically mean taking off normally, but faster, not riding the clutch like a learner driver. for rwd cars you are best off stalling it up on the handbrake. so handbrake on, build revs, let the clutch up to friction point so the rear end starts to squat a bit. when the light goes green drop the handbrake and let the clutch up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...