Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

I have been running a switch on my r33 chuki for about 4 years or so with no problem , I run the switch through the 4wd fuse in the boot fuse box, just take the fuse out take it apart and replace the 2 standard spades inside for your own with wires attached ,stick an inline fuse in of the same rating and run the 2 wires to the centre consul and fit a switch,,if your in 4wd you can switch on the go ,takes a minute or so for the line pressure to drop then the 4wd light comes on and your in 2wd.

You still have to turn the ignition off and on to reactivate the 4wd.

I'm running a full 5 gear OSG cluster with strengthed input and excedy twin plate.

  • 1 month later...

http://www.rhdjapan.com/hks-kansai-active-e-ts-attesa-controller-nissan-bnr32-bcnr33-15041

Has anyone used this controller? I need to put my 33 GTR into rwd for the drags, looked at the Full Race ones but they aren't for v-specs and the

Ruzic ones don't go to full rwd. This is the only other one I found so if anyone knows about them your help would be much appreciated.

Anyone can take a photo of this said "plug"? I am trying to locate it but theres too many!

In my S1 Stagea its behind the drivers side kick panel : a very small black plug taped to another loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

Hmm.... so you're saying the plug wire colour is different to the socket wire colour? WTF is Nissan thinking but if thats the case, shouldnt be too hard to trace.

I'll have a look for that and hopefully its the same for the 33 GTR in terms of the colours. Cheers.

In my S1 Stagea its behind the drivers side kick panel : a very small black plug taped to another loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

  • 2 years later...
  • 3 months later...

Hi all

I'm trying to locate this plug but am unsure which one it is.

Is it the brown one attached in this picture.

Cheers

Most likely. Here's how I described mine when I saw it:

In my S1 Stagea its a very small black plug taped to a loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

You will soon know when you disconnect it. If the car explodes in a ball of fire its the wrong one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...