Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

I have been running a switch on my r33 chuki for about 4 years or so with no problem , I run the switch through the 4wd fuse in the boot fuse box, just take the fuse out take it apart and replace the 2 standard spades inside for your own with wires attached ,stick an inline fuse in of the same rating and run the 2 wires to the centre consul and fit a switch,,if your in 4wd you can switch on the go ,takes a minute or so for the line pressure to drop then the 4wd light comes on and your in 2wd.

You still have to turn the ignition off and on to reactivate the 4wd.

I'm running a full 5 gear OSG cluster with strengthed input and excedy twin plate.

  • 1 month later...

http://www.rhdjapan.com/hks-kansai-active-e-ts-attesa-controller-nissan-bnr32-bcnr33-15041

Has anyone used this controller? I need to put my 33 GTR into rwd for the drags, looked at the Full Race ones but they aren't for v-specs and the

Ruzic ones don't go to full rwd. This is the only other one I found so if anyone knows about them your help would be much appreciated.

Anyone can take a photo of this said "plug"? I am trying to locate it but theres too many!

In my S1 Stagea its behind the drivers side kick panel : a very small black plug taped to another loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

Hmm.... so you're saying the plug wire colour is different to the socket wire colour? WTF is Nissan thinking but if thats the case, shouldnt be too hard to trace.

I'll have a look for that and hopefully its the same for the 33 GTR in terms of the colours. Cheers.

In my S1 Stagea its behind the drivers side kick panel : a very small black plug taped to another loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

  • 2 years later...
  • 3 months later...

Hi all

I'm trying to locate this plug but am unsure which one it is.

Is it the brown one attached in this picture.

Cheers

Most likely. Here's how I described mine when I saw it:

In my S1 Stagea its a very small black plug taped to a loom with a single yellow wire with a green trace going to the plug and a single black wire going to the socket.

You will soon know when you disconnect it. If the car explodes in a ball of fire its the wrong one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...