Jump to content
SAU Community

Recommended Posts

thanks steve and luke.. we left it idling in the driveway for about an hour once first started up, and drove it gingerly for the 5 k's , but you still think the squealing is because we didnt prime them and the turbos are stuffed because of a split second without oil??

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

sorry for the blatant obvious, but maybe let a mechanic have a look at it before you go pulling a turbo off again........possibly needlessly

What area are you in? There's always a decent workshop nearby.

+1

But also, can't leaky exhaust manifold gaskets make a car squeal under load? Thinking of cars I've heard around Malalla/Winton here.

Yup, mine has howling/squealing like a banshee at the October track day last year when the engine gave way, and it was due to a gasket on the turbo spacer blowing out.

Cheers guys !! Sled it's getting looked at right now, but the owner is a mechanic and we had another mechanic look at it last night, it could quite possibly be the exhaust manifold gaskets as when the new turbos were put on the old manifold gaskets weren't replaced (all other gaskets were though)

Cheers guys !! Sled it's getting looked at right now, but the owner is a mechanic and we had another mechanic look at it last night, it could quite possibly be the exhaust manifold gaskets as when the new turbos were put on the old manifold gaskets weren't replaced (all other gaskets were though)

Hopefully thats what it is, I dont reuse gaskets ever, unless they are like just the joins in the exhaust or something, every time the turbo or the manifold comes off the motor its treated to new gaskets.

I think the gasket kit for the turbos didn't come with one for obvious reasons but I just think it was overlooked because of that reason. not exactly sure. and there's a lot of burning coming off the turbos as in smoke, would that just be due to touching every part numerous times with oily hands and it's simply just burning off??

Use the genuine Nissan turbo gaskets, a lot better then the aftermarkets, I have used the Garrett ones on mine and the Nissan ones are far better.

Also, did you reuse the copper washers or use new ones?

is there anything to do with a plug on the turbo? a drain of some sort that your meant to unplug?? or does this ring any bells for anything that might make more sense to you guys?

Hi pitch squeal, look at the induction side of the turbo's, the y piece between the turbos may be loose or gasket leaking you should be looking for a boost leak through a very small orifice had this on mine before.

Hope it helps

Devo

Hopefully thats what it is, I dont reuse gaskets ever, unless they are like just the joins in the exhaust or something, every time the turbo or the manifold comes off the motor its treated to new gaskets.

Word. Get the OEM VRK (?) set and you'll get every gasket that you need, to nissan spec. If its good enough for nissan, 99% its good for every other dude out there... only non nissan gasket I got is the cometic MLS 1.3mm head gasket....

I even have gaskets left over I reckon I'll eventually use - won't have to pay for the individual component when the 20 year old oem eventually gives way

-D

Word. Get the OEM VRK (?) set and you'll get every gasket that you need, to nissan spec. If its good enough for nissan, 99% its good for every other dude out there... only non nissan gasket I got is the cometic MLS 1.3mm head gasket....

I even have gaskets left over I reckon I'll eventually use - won't have to pay for the individual component when the 20 year old oem eventually gives way

-D

you thinking of a VRS kit mang?

Edited by DamageInc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...