Jump to content
SAU Community

Recommended Posts

yeah no worries Aaron let me know when I got some time off after today :)

I'll see ya at sandown anyway if its a hot day.. bring the roller?

yeh ill bring it, but would rather use a heat gun..

Supposedly they strengthen up the front to help with chassis rigidity...

eh, i cant see it doing anything, especially when there are already like 6 braces all up holding the front from flexing... if anything, it would probably just promote understeer buy over stiffening the front, but maybe theres more to it that im missing..

on a massive power evo running r comps, i can see it doing something... but that's about it

exactly. more suitable would be an under chassis K Frame.. look at it on the evo oz sight, under X3e vendor.. i want one of those.

mad, bring your heat gun too then aaron :P cheers cuz

yeh alright.. you can give it a shot if you like lol..

vy37v9.jpg

the stupidity in this picture is overwhelming

has a perfectly good number plate bracket, yet drills through the side of the front bar..

anything that has a stance|nation sticker, is clearly owned by the retarded.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...