Jump to content
SAU Community

Recommended Posts

i soaked them in coke over night, soaked again in fresh coke and then washed them.
THEN I POLISHED EVERY SINGLE ONE WITH A TOOTH BRUSH AND AUTOSOL

get new ones, way easier

ill sus out NPC.
thanks sau
michelle_obama_mike_tyson.jpg

michelle_obama_mike_tyson2_zps31c2e389.g

i soaked them in coke over night, soaked again in fresh coke and then washed them.

THEN I POLISHED EVERY SINGLE ONE WITH A TOOTH BRUSH AND AUTOSOL

get new ones, way easier

ill sus out NPC.

thanks sau

ahh...yeah i f**ked half of them anyway...shitty bolts...a box of 100 allen headed bolts is about 30$ in black or stainless...

well by half i mean 4..so far...2 wheels to go..

it would since im going 33 gearbox.

arty make sure theyre high tensile and you put PLENTY of thread lock when retorqing them.
i used an impact driver. made life easier.
also dont use allen bolts, use the stary looking BBS bolts. harder to strip.

i soaked them in coke over night, soaked again in fresh coke and then washed them.

THEN I POLISHED EVERY SINGLE ONE WITH A TOOTH BRUSH AND AUTOSOL

get new ones, way easier

ill sus out NPC.

thanks sau

michelle_obama_mike_tyson.jpg

michelle_obama_mike_tyson2_zps31c2e389.g

wut?

lol

what size are your stock rims on it 19 or 18 ?

theres a fake meister style wheel black with a bronze lip could look hot...

how much power...NPC ones are real nice...cheap too...

19s standard, I had 20s for a bit but didn't like traction / ride quality

I'm gonna put this out there

Babies aren't funny

other people's baby's are shit.... but Orlando is awesome

babies are the biggest "in-joke" of all time

Why does F6 looks better than GS?

because it's a more expensive car, and hence they want it to look better... remember the GS is the base model

say NO to "stanced" fitment.

its going to hit a bump and take off/bend the shit out of its guards, retarded idea.

Not at that ride height... that car aint stanced, it just has a little poke....

Yeah..so 18s not an option...the rears look ok on that car you posted but the fronts look too wide...

reckon i would go staggered personally...with at least a little dish even...

Yeah pretty much what I've got, staggered 8.5 +17 and 9.5 +30 with fatty semis all round

And yeah Hamish is right costs a bit more, not a lot but when you think about the tune only power of the GS made it hard to resist! My first v8 too. Don't get me wrong I still LOVE turbo cars both have pros and cons

About to board tassy bound hopefully not too cold down there.

Edited by UNR33L

yup, would be a hard choice if I was buying new....

Think the GS would have me on the ability for legal mods

Yeah that was a big factor as well. Only thing GS is missing over f6 is really just the front brembos. 2k and you can get a 6 pot kit with braided lines and fluid anyway. For street use the standard GS brakes are fine.

I imagine a 370kw is a whole lot of fun....how does it go against the turbo Ford?

Definitely goes well against the turbos! You have to throw a few k into the turbo to get on the same level of power.

Biggest difference is driving around town.. Only need to put foot down like 1cm and your off lol any more than that off the line you'll screech the wheels. Hell my mum drove it and skidded it off the line by accident in the dry hehe

Edited by UNR33L
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...