Jump to content
SAU Community

Recommended Posts

Hey GTRRKT you bought the nur off of Matt yeah, mate throw up a photo of it that has to be one of my favourite R34 GT-R's out there. If your ever looking at selling it let me know :)

Congrats on the purchase definitely money well spent.

Hey GTRRKT you bought the nur off of Matt yeah, mate throw up a photo of it that has to be one of my favourite R34 GT-R's out there. If your ever looking at selling it let me know :)

Congrats on the purchase definitely money well spent.

Thanks mate :)

Here are some pics from the weekend. They are only pics from my phone but should have some high res copies soon.

post-82405-0-88513100-1319425517_thumb.jpg

post-82405-0-75749300-1319425458_thumb.jpg

You get much attention from the police in that?

When I do Drive it.....it's not around the CBD and any attention it gets has always been positive (one time from a Federal Cop)

The Car was Factory Built and has a full compliance Plate (not engineer certificate)....One of 7 Built this way in Australia

before they shut their doors.

can non r35 owners join in?here is one of mine....a 2009 crf450x road reg with cr500 engine :)....it pulls out tree stumps

gallery_2711_155_251884.jpg

gallery_2711_155_270251.jpg

Love the Smokers........I ride the new TE250 Berg............Nice Build...........what are the wheels off ?

Why are you selling such a rarity, if you don't mind me asking?

Been told/asked the same by a few people...........Not an easy question to answer.

Quiet happy to keep it at the end of the day

II have a lot of toys and can't seem to get the time to play with them all......

The Car is basically a road registered "Class C LeMans" Race Car with working blinkers etc

and handles like a DREAM and has a sound track to die for.

Having Chev running gear with G50 Porsche Transaxle it is not only Bullet proof but also cheap

to maintain.

I have had many offers.....form swap's with Cash and asked if I would go a little lower on the

asking price and not only have I declined but raised my asking price since.....

So maybe I don't really want to sell it.......

Oh well, good luck with the (non)sale, always liked these things. One of those cars that turns every single head on the road because you just don't see anything around like it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...