Jump to content
SAU Community

Options For An R32 Project

skylinesthelimit
 Share

Recommended Posts

skylinesthelimit Apprentice

skylinesthelimit

Posted
Posted

So I have a 1989 R32 GTS auto, and I picked it up fairly cheap, was going to work on it myself as my first project and then to be my first car, but recently after trying to fix a coolant leak, I somehow lost one of my welsh plugs at the back of the engine block, right up again the firewall... So now its basically stuffed and sitting in my garage... The body is is need of a full respray (sanded down to nothing and start from scratch) and the front and rear bumpers need replacing.. I don't know much about body work but I figured to get this done I would be looking at paying around $2000.. Then there's the engine side, I think I would end up paying around $1200 for the work and this includes the coolant leak from the heat hose that was already there and any other issues they may find... I'm not sure on those figure they are just a guess as this is my first car... Now I know a skyline for a first car is something frowned upon on these forums but I am no p-plater with 100 fake hours and a mullet. I grew up on acreage and have learnt to many drive different cars (bush bashing) and have been driving since the age of about 13.

So I just want to see what other people would think as I only have a few mates with opinions about what to do. I could fully remove the rb20 in there and drop a 25 in the only issue there is that I feel because its only an auto I wont enjoy it and then I still have to pay the 2000 to make her look good. Or I could get these issue fixed but that's alot of money to pay on a car that may not have much life left in her. I could sell the car as is for about 2500 I reckon and save up for something cleaner and that doesn't need work. Or buy another shell and go from there maybe take the rb20 out of the current one, sell the shell, fix the engine issue and then buy another shell with no exterior issues and drop the engine into that. This work would all have to be done professionally unless maybe I get a hand from some mates but even then its kind of a difficult job.

So what option would be the best, are my estimations on costs close or way off, or is there another option I could take that I have overlooked?

Thanks,

Mack

Link to comment
https://www.sau.com.au/forums/topic/380714-options-for-an-r32-project/
Share on other sites
NISMØ Community Regular

NISMØ

Posted
Posted (edited)

Your estimated costs... prepare to pay twice that if not more.

You cant just swap engines like you swap your undies, its illegal. If the engine didnt come in the car in the first place, it has to have an engineers cert to certify it meets emissions standards. The only 25 you can drop in is the non-VCT rb25de out of 32 gts25s which are harder to come across and ultimately a huge waste of time.

Coolant leak? Sounds like a broken radiator pipe, easy fix. Broken radiator? $300-$500+

If the car is already a colour and you respray it the same it can reduce the cost, but in your case its not. Front and rear bumpers , full sand down , and a DECENT full body respray = $3000+ atleast. Fair chance the things got rust in it too so theres more work to be done.

IMO, sell the car. You probs wont get 2500 for a rb20de auto skyline with coolant leaks, f**ked bumpers and shit paint tho, ide pay $1000 max.

Unless youre experienced, dont try and attempt any of what youve set out to do, its not worth it, will make you hate the car. Not trying to bring your hopes down or anything but things like paint jobs and such need to be done right or they look shit and last no time at all.

my 2c

Edited by NISMØ
skylinesthelimit Apprentice

skylinesthelimit

Posted
  • Author
Posted

Your estimated costs... prepare to pay twice that if not more.

You cant just swap engines like you swap your undies, its illegal. If the engine didnt come in the car in the first place, it has to have an engineers cert to certify it meets emissions standards. The only 25 you can drop in is the non-VCT rb25de out of 32 gts25s which are harder to come across and ultimately a huge waste of time.

Coolant leak? Sounds like a broken radiator pipe, easy fix. Broken radiator? $300-$500+

If the car is already a colour and you respray it the same it can reduce the cost, but in your case its not. Front and rear bumpers , full sand down , and a DECENT full body respray = $3000+ atleast. Fair chance the things got rust in it too so theres more work to be done.

IMO, sell the car. You probs wont get 2500 for a rb20de auto skyline with coolant leaks, f**ked bumpers and shit paint tho, ide pay $1000 max.

Unless youre experienced, dont try and attempt any of what youve set out to do, its not worth it, will make you hate the car. Not trying to bring your hopes down or anything but things like paint jobs and such need to be done right or they look shit and last no time at all.

my 2c

Thanks for that, after having abit more thought about it, it looks like I will have to sell it.

Any other opinions are welcome

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...