Jump to content
SAU Community

Recommended Posts

Hi everyone

i just got myself a r34 4door for drifting (unlicensed)

mods: fmic, bov, pod filter, power fc, boost controller, brand new nissan H/duty clutch, exhaust.

also has suspension already

the car is sitting on 12 psi making arond 280 hp

whats the next little items i need ?

And the H/duty clutch hasnt gone in yet so if i should get another one just let me no please :)

cheers

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/
Share on other sites

As above plus save the money you are planning on mods to maintain the car, no doubt you will need new front and rear bars, lots of tyres etc

Dont get into the trap of constantly modifying stuff, Wait until you have oerfected sliding the car as is before chasing more power etc.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6071852
Share on other sites

here she is

You'd probably want to lower it for better stability and handling for drifting.

Work on the Suspension / Braking / Tyres.

Power mods is not necessary if you are just starting out.

All should be good.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6072064
Share on other sites

You'd probably want to lower it for better stability and handling for drifting.

Work on the Suspension / Braking / Tyres.

Power mods is not necessary if you are just starting out.

All should be good.

Why?

It would just f**k the roll centres going any lower than that

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6072069
Share on other sites

braking?! standard calipers would be fine.

Get it out to the track, fix shit you break and when you feel your ready for more power, or more lock then go for it.

Oh, a must have is a good, supportive seat it makes a world of difference.

Edited by Run-It-Hard
Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6072075
Share on other sites

Just get as much track time as possible, seems like it's a decent base to learn in already.

1000 times this.

Your car is pretty epic already, just get out there and rip some skids :D

Maybe invest in a gopro too so you can not only upload to youtube and show off your maaaaad skills, but you can watch your videos and see what you can improve on and maybe get other pro people to comment too.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6072098
Share on other sites

braking?! standard calipers would be fine.

Get it out to the track, fix shit you break and when you feel your ready for more power, or more lock then go for it.

Oh, a must have is a good, supportive seat it makes a world of difference.

That's just me.

Upgrade brakes to take a higher heat range and more response.

Each to their own.

And yes, a racing seat will make a difference.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6072334
Share on other sites

most important mod = welded diff / 1.5 way or 2way

Negative, I learn't on an open diff. If anything it'll be better to learn with less. You'll then realise how things work/make it easier when you start adding parts to the car.

VLSD would be fine for now.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6073023
Share on other sites

That's just me.

Upgrade brakes to take a higher heat range and more response.

Each to their own.

And yes, a racing seat will make a difference.

upgrading brakes is just a waste of money on a drift car, you won't have any issues with stock gear and half decent pads

get a decent seat, make sure the diff is locked and go drifting, you don't need anything else

Maybe invest in a gopro too so you can not only upload to youtube and show off your maaaaad skills, but you can watch your videos and see what you can improve on and maybe get other pro people to comment too.

dont get a gopro if you buy a camera as there shit :down:

Negative, I learn't on an open diff. If anything it'll be better to learn with less. You'll then realise how things work/make it easier when you start adding parts to the car.

VLSD would be fine for now.

.....

just lock the diff, drifting without a diff that locks it just a waste of time and it won't teach you anything

Edited by driftnick13
Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6073029
Share on other sites

i think the car has a 2 way diff now :) and suspension i dropped and is tucking 18'' tyres and has got a recaro bucket seat, brakes i will needa replace and what sort of clutch do i need? i got a H/duty nissan clutch but its brand new and not in the car yet

long story short...... it was my brohers car, he go it from SA and didnt license it, then f**ked the clutch so parked it up and owed my dad 13k so dad said that he will keep the skyline and dont worry about the bill and dad gave it to me :) :) (daddys boy much haha )

so yea i no the cars back ground and everyhing :)

and yes theres a 33 gtst (mine) 34 gtt (mums) 34 gtr (dads) 34 gtt (sisters) and yea....family of skylines

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6073265
Share on other sites

Fuuuuuu, you lucky bastard! hahaha.

Sounds like your car is good to go mate, you've ticked pretty much every box we've suggested.

Just get a fire extinguiser and I think that'll do it. needs to be at least 1kg and have a metal bracket then placed with in reach of the driver.

That clutch should do ok. I've got a Jim Berry Full Monty for sale if you want it pirate.gif

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6075008
Share on other sites

Speak to ISC-PERFORMANCE and get a set of n1 coil overs, rear camber arms, hicas lock bar, front caster rods, rear traction rods. Then just get used to the power you have now :) also a 2way diff is a must. Also make sure your handbrake is upto scratch.

Link to comment
https://www.sau.com.au/forums/topic/380780-got-a-drift-car/#findComment-6076936
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...