Jump to content
SAU Community

Recommended Posts

Hey you! You like sports car!?!?

SAU_Poster.jpg

Matthew Everingham Photography in conjunction with SAU:NSW are back again following the success of last year's calendar with new 2012 model.

Each Calendar is printed in A3 Ring bound high gloss paper for the best results and would look good just about anywhere!

This is going to be a limited batch so order now to avoid missing out.

Here are the details:

Cost: Each Calendar is $24.95 for non-members, $19.95 for SAU:NSW Financial member Delivered to your door

To order simply deposit money into club account which is below

Bank - NAB

Branch - Marrickville

Account name - Skylines Australia NSW

BSB - 082 356

Account number - 546 393 766

Please put your full/user name in the description, eg "Calendar D Michaels" or if you have a long surname "Cal Joey Shabadoo"

Once you have made your deposit send an email to '[email protected]' listing your full name and delivery address

All orders need to be placed and payments cleared by December 3rd 2011

After the cut-off date all orders will be posted out for arrival by mid December.

Here is a quick Preview of what to expect.

6325724278_b69555d058_b.jpg

6324969819_e1f9bbe46e_b.jpg

6324969361_751e0b3366_b.jpg

In order to keep the quality as high as possible as well as keeping the cost as low as possible both SAU:NSW and Matthew Everingham would like to thank the following sponsors

Hope Health Group - http://www.hope-health-group.com/

Just Jap - http://justjap.com/

Top Secret Imports - http://www.topsecretimports.com.au/

Performance-Wise - http://www.performance-wise.com/

PhillB Enterprises - http://www.phillbenterprises.com/

Circuit Club - http://www.circuitclub.com.au/

Unigroup Engineering - http://www.unigroup.com.au

V Sport - http://www.vsport.com.au

Japlink Motors - http://www.japlinkmotors.com.au

Japan4 - http://www.japan4.com.au

Import Monster - http://www.importmonster.com.au/

Autocult.net - http://autocult.net/

If you have any questions or comments please post below or PM me.

Regards,

David

SAU:NSW Vice-President

Link to comment
https://www.sau.com.au/forums/topic/382725-skylines-australia-2012-calendar/
Share on other sites

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...