Jump to content
SAU Community

Recommended Posts

This.

It's also very hard to compare cars and prices.

I got my R32 GTS-T for 5k not registered in Oct 2010. But I wanted a largely original and tidy example (particularly) the interior. I've spent another $4400 getting it to the point where I wanted it.

Some people obviously want way too much for their car but some people also pay peanuts for a car that's rough as and end up paying for it down the track.

gets it in one line :) (btw I knew what I was buying.)

I have seen a few $5k cars that were cut/shut units where the owner was none the wiser. also seen a fair few GTRs with side swipe damage and rear side hits that people have paid silly money for.

so for those that are saying they got a bargain - how deep did you look when you bought the car?

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

so for those that are saying they got a bargain - how deep did you look when you bought the car?

Saw this thread a few weeks ago and was waiting for someone to hit the nail on the head. Very good point above, when it comes down to cars - in most cases, you get what you pay for.

Im shopping for an R34 GTR at the moment, Ive had 3 or 4 offered to me for around the 36 - 37k mark, however these were for obvious reasons.

I'd rather hold out and spend the required $45k - $55k for a fantastic example, rather than just settling for something average.

So what you're saying is that your car is awesome and got you laid? :laugh:

Yes sir. :thumbsup:

But on a serious note, car yard did rwc for me (owned by habibs tho :D )

and just car insurance ftw?

So what you're saying is that your car is illegal and not insured. :sleep:

Yes sir. :thumbsup:

But on a serious note, car yard did rwc for me (owned by habibs tho :D )

and just car insurance ftw?

You're a f**kwit, go marry a tree and get payed nothing.

He means run into a tree.

Nissan 200SX S14, for $2000.

No motor

No gearbox

Not much interior

Very few exterior panels

Still registered though :D

Ready for a straight 6 of Nissan or Toyota Heritage :P

No major problems found yet....

^^^ That's what one guy was overheard to say outside the 40th floor when he'd just jumped off the 50th.

But you never know...

One woman was known in the smh to have sold her hubbie's 500SL for a hundred after he'd gone to Fiji with his secretary for 2 months and announced his intention to divorce. He said, "You mean $100k?"

She said, "No $100" and hung up.

Sad to say that alot of people need cash fast and cannot afford to keep their cars, if your willing to low ball theres bargains to be had if your lucky and they need cash quick, Ive known guys who have come into some cash but then spent it all on crap, when its rego time theres no money and a car sitting in the driveway, I also know guys who search out these guys with a pocket full of cash.

Unfinished project cars can be had for a pitance of there real value too, my mate picked up a clean HQ one tonner that needed paint for $500 from a guy that was being posted to Darwin, he had no room in his new residence for it, 2 months rego, a 307 with a powerglide, and HQ statesman front end, he had spent a ton of cash on it.

Ive been hit myself with a AW11 MR2 which I was trying to sell before I went overseas, no takers at all untill a guy turned up wanting to buy the rims and some interior parts which he said he would pay $600 for, I told him he could have them for $600 if he took the car away.

Some one sell me a clean VL for $500.......

gets it in one line :) (btw I knew what I was buying.)

I have seen a few $5k cars that were cut/shut units where the owner was none the wiser. also seen a fair few GTRs with side swipe damage and rear side hits that people have paid silly money for.

so for those that are saying they got a bargain - how deep did you look when you bought the car?

It's all a false econemy. The maths goes; Car + cheap = winning...until all the costs from inherent problems arising from said cheapness.

As I said, I paid 5k for mine, thinking it was in alright condition. But it all adds up. Overall the car has cost me well over 10k. Looking back, I should have purchased an "overpriced" R32 in excellent condition for 9k-ish.

Edited by Truffles

A car is only ever worth what someone is willing to pay for it . The killer for the market is when some tool buys a shit box for cheap , then expects a good example of the same car to be worth the same amount.... The good thing about performance/rare cars is that even if they do drop in price , eventually the shit ones get wrecked so there are less of them which pushes the value of the good ones back up :) . Don't believe me? 2 years ago there were heaps of r32's rolling about for 5k that look reasonable and were manual turbo , now there is sfa and people are asking more $$ for them :) , the same will happen with r33 and the same thing will happen to r34's etc

Considering most people here are skyline owners and depreciation on the surface seems like a bad thing, however have a fender-bender, need some parts or whatever you can buy it cheap.

Also if we didn't have the rapid depreciation most people here would be priced out of a skyline! Compared to other cars a skyline 32,33, 34 holds its value much better, have a look at how cheaply you can buy a V8 or 2j soarer.

How about flipping the conversation for a few posts.

I just SOLD one of my R34's in excellent condition for $17k in 1.5 weeks (and I actually had 3 people after it at the time).

There still are buyers out there looking for the good ones, realise how many below average examples are out there and willing to pay for the extra for a great one.

post-86021-0-97356300-1325287127_thumb.jpg post-86021-0-16692100-1325287133_thumb.jpg post-86021-0-71822700-1325287230_thumb.jpg post-86021-0-44259700-1325287236_thumb.jpg

Just thinking, I also helped a mate purchase an Evo VIII a few months ago.

While we were shopping, i was amazed how many of them (around the $24 - 25k mark) had a whining diff, siezed AYC pump, close to bald tyres, hardly any rego, had obviously done more km than on the cluster, poor resprays,

A replacement AYC pump alone from Mitsubishi is $3500. Used, maybe $1000 - $1500 fitted. But you can see how quickly it can add up if you buy a shit box. He ended up paying a little bit more and touch wood, hasnt had any issues.

Then again, there are always some legitimate bargains out there, and some cars will always just be hard to sell. Just a grain of salt, but food for thought. Happy new year every1.

Wow I feel like such a dunce I payed $16,000 for a r34 25gt

2000 model,,,

At least it had low kms.....

That you can prove are real?

Not being a dick but yeah skylines with genuine kilometres is a very "prove it!" sort of situation.

That's what I mean, like at the time I was like yeah! My dream car is in reach!!!

Now I'm like F*#K I wasted a load of money on something I can't prove

I bought the car n the odometer read 69666km

Edited by SkyBlue92

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...