Jump to content
SAU Community

Recommended Posts

Wasnt sure where to put this... this section seems to be full of the smartest blokes and highest traffic. Ime about to embark on what i know will be the more time consuming painful job you can do to a car... wiring it from scratch.

who here has done it and can give me some tips.

Do i use any of the factory nissan loom/fuse box or do i just start from scratch?

Link to comment
https://www.sau.com.au/forums/topic/383674-full-car-rewiring/
Share on other sites

Fag. Lol.

Hmm ok, wipers, yes i can understand. Electric windows adds weight uleh! But they never came with manual windows so your kinda stuck..

The wiring for power windows is a little complex as it usually routes all over the place to the necessary relays. Usually there's a thermal overload for them somewhere.

Have you ripped out things like all the cruise wiring, abs, radio wiring, speaker wiring, air con/climate control wiring etc.

from those that i have spoken to... dewiring an existing loom seems to be the best way to go

Dewiring is a pain in the arse! But it does have advantages.

I look at it like this:

If you are leaving everything in it's original location then yes, dewire.

If you want to retain factory switch gear then dewire.

If you want to relocate fuse boxes and have switches for everything then buy a kit.

If you want to relocate fuse boxes and retain factory switch gear you end up with something like the picture which has partial factory dash and switch wiring, modified engine loom to suit relocated fuse box, custom alternator, battery, starter, and lighting wiring. I also did custom power window wiring. It was a PITA.

DSC00515.jpg

if your de wiring try this site, might help you with a tidy engine bay loom. and it has a lot of options.

http://www.chasebays.com/product/nissan-240sx/chase-bays-products/chase-bays-engine-harness--nissan-rb25det

as for the wipers, if you have ditched everything and kept wipers then you need the s14 loom for the full 6 wires(but thats easy to chop) you will either need new connectors or keep the old connector next to the computer. i would ditch the whole setup and run a switch and relay for them.

have a look at that site again, it might give you the wipers option?

thanks for that man. the engine loom will be easy as i will be getting a haltech with a flying loom. so will be able to start from scratch with that one,

well i ripped everything out of mine.. so much wiring!!!! far out. Makes me think that de/wiring it will be more time wasted then good and i might just be better off running new wires and loom.

I wired my car from scratch, wasn't overly hard, power windows where abit of a prick but I just used a 3 way momentary switch with 6 terminals on the bottom. You need to switch the ground/positive to go up/down.

Remember when wiring the alternator that you need a check light. Pm if you got an questions.

All I can say in my limited experience. Is buy a pair of Deutch plug crimpers ( I think there are 3 different sizes so be careful). Now make a friend who is an autosparky for earth moving equipment and or truck trailers like I have. Get him to buy all the deutch plugs at about 1/5th the price that any normal person can buy them/ sells them. (a plug I was quoted $15 bucks for cost him about $3-4) make sure you get some good quality side cutters and good quality wire strippers, good quality heat shrink and a tube dielectric grease. (all the things your new mate can source for a fraction of the price you can) last step invite your mate around for a bbq on a Saturday and explain to him that your a little confused on how to use the crimpers correctly and that you need about 2 dozen examples b4 you will get it right.

Your car is now rewired lol

the 2 companys that my mate deals with are below.

http://www.connectsource.com.au/

http://www.genr8.net.au/

YOUR WELCOME

Chris

can you pm me more info trent?

also whats the racepak unit? im getting one of their IQ3 dashes also

Simon i have pm turned off, email me [email protected] and i will forward on the details.

I wired our 180 drift car from scratch. Its really easy if you know basic relay circuits. The ECU control is made up of a few relay circuits and thats it (were running PFC on the std ECU loom).

We thought about de-wiring but what a pain in the arse! There are sooo many things to get rid of, and if you cut one wrong thing youll be scratching your head for weeks because you wont understand the nissan loom. Youll spend as much time picking the tape off it as making a whole new loom.

I used the old 180 looms for the relays and relay plugs, and used the fuse box to hold the relays, hell, i even used the wire from it. All i bought was a 10 fuse holder from burson. The only paperwork I needed was the ECU pinout, and a ECU wiring diagram, for power, ECCS power circuit, tach and fuel pump run.

Well be running electric windows which are easily done as above, google a simple motor forward/reverse switch setup. If you can find a wiring diagram for the wipers thatll be a big help, otherwise just probe it before you remove it, and reuse that part of the loom.

Brakes/reverse/headlights are all simple relay circuits as well obviously. There are some pics in our build thread BUT its not finished yet so its not zip tied and conduited so it looks like a head ache but really its not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...