Jump to content
SAU Community

Recommended Posts

So I had a heater hose under the inlet go on me the other week in traffic. I completely cooked the engine with so much steam coming out the bonnet I had trouble steering down a slip road. It turns out with steam whistling through the system I cracked the overflow bottle. Have you got anything to replace the std reservoir. I may cut and tape up a breather.overflow setup that you can go to town on for me?!?!?

No Ti gear knobs sorry. Solid Ti billets are extremely expensive and rare.

I'm also not tooled to machine it.

No problem at all Roy.

Best to make something up from cardboard chuck it in a box and I'll redo it from alloy plate and send it back.

You shall see it tomorrow, I've just had no time to sit down and invoice anything recently.

About to be released are my new surge tank/pump setups with twin aero motive pumps inside the surge tank, sard style.

Not a problem I'll cancel the invoice.

If anyone wants an R33 undercar surge tank setup for twin 044's I've got one fabbed and ready to pressure test/ post off.

$330 inc gst plus postage charges.

You have a pm.

I don't get on here everyday, the reality is SAU accounts for 10% of my work so I don't always check threads and PM's daily. It's been weekly as of late.

My email is available. Best to contact me via that, or leave a return voice mail.

Not a problem I'll cancel the invoice.

If anyone wants an R33 undercar surge tank setup for twin 044's I've got one fabbed and ready to pressure test/ post off.

$330 inc gst plus postage charges.

Any pics of the surge tank Brad? Got a mate that might be interested in one.

  • 2 weeks later...

Good to see your happy with it.

It's a pretty trick way of doing the washer bottle filler on that can with the filler tube running through the catch can section .

From the top it looks like your putting water into the catch can ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...