Jump to content
SAU Community

Recommended Posts

Although these need to be on the right car, they are still one of my favourite rims, if only they came in a 19 x 10.5

These on a blk or mnp r33 would look nuts in a deep dish 19..

http://www.gruppe-s....rsion_2_528.jpg

C'mon advan

I hate those Advan wheels you posted. There's a few nice Advan wheels but these three-spoke ones look ugly as!!

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

I used to work compliancing cars back in 1999 for an importer and we had a few serious cars come through our doors, the wildest ones where supporting these rims. I agree with you that they can't be thrown onto any car, they need the perfect combo, but if they made them in 19s, a gold set in 19s would look great on a mnp or black r33 IMO

Btw, I haven't seen many r33 gtr's with silver 19" lmgt4s like on r34 nur.

The enkei rpf1 look pretty good on them also

And not sure if there are any Melbourne guys reading this post but there used to be a white s3 r33 gtr with number plates VOLARE with polished rim and silver centre Simmons fr19's

The thing looked insane

My top 4 in no real order would be

Simmons fr19 min ( polished lip with solver spokes)

Enkei rpf1 18 or 19

Lmgt4 19" min

Te37 19" min

Btw, I haven't seen many r33 gtr's with silver 19" lmgt4s like on r34 nur.

The enkei rpf1 look pretty good on them also

And not sure if there are any Melbourne guys reading this post but there used to be a white s3 r33 gtr with number plates VOLARE with polished rim and silver centre Simmons fr19's

The thing looked insane

My top 4 in no real order would be

Simmons fr19 min ( polished lip with solver spokes)

Enkei rpf1 18 or 19

Lmgt4 19" min

Te37 19" min

Looks like you're a sucka for massive dish rims. TE37 and LMGT4 only come with those dish at 19.

Personally I think 18 is the perfect size in terms of look, price (both rim and tyres) and steering. No doubt 19 looks great and better than 18 but I cant justify spend the extra coins just to look good.

Yes I do like a dish dish I guess, look I like 18s too, good price on tyres, better ride, but r33's are pretty big cars, so if your talking price a set of 19 varsstoens or whatever they are called with tyres from the tyre rack will cost you less then 18 te37's on there own, seriously though, I still think the Simmons fr wheels are amongst the best rims that are a available, not only that but you can order any size, colour, width and offset...

Didn't Simmons shut the doors a couple of years ago though? You're right the FR was probably one of the best looking wheels but more suited to Aussie cars really, you cant go past TE37 on any GTR. And whats with everyone flogging off their SL's? I know when I eventually get a set they will be staying put.

Fr simmons are now made to order from Tempe tyres, after seeing them on an r33 believe me they suit them well, fr18's on a 32 gtr suit well also. But I'm not a fan unless they are polished lip with silver spokes

I love te37's but some guys where talking about a rim that isn't common on a gtr, you really can't go wrong at all with te37's or lmgt4s, but lets admit it, we have all seen a gtr with te37's on it

So nobody flame me, I agree that they are probably the best rim for a gtr, just saying there is other unique stuff out there

Fr simmons are now made to order from Tempe tyres, after seeing them on an r33 believe me they suit them well, fr18's on a 32 gtr suit well also. But I'm not a fan unless they are polished lip with silver spokes

I love te37's but some guys where talking about a rim that isn't common on a gtr, you really can't go wrong at all with te37's or lmgt4s, but lets admit it, we have all seen a gtr with te37's on it

So nobody flame me, I agree that they are probably the best rim for a gtr, just saying there is other unique stuff out there

So I guess it is same to conclude that the TE37 is the best looking wheel for the GTR.

Nissan%20GTR%20R35%20Blue%20Volk%20TE37%20Black%20c_w600_wheelindustry_watermark.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...