Jump to content
SAU Community

Recommended Posts

yeah i kinda cant be bothered gapping plugs anymore

i was told to get heat range 7s

and the problem is bursons no longer have BCPR on there system any more which makes me think theres a different part number for them now i think i can use bkr7e from memory which come pregapped

the only difference between the BK and BCP plugs is the length of the plug from the gasket to the top of the plug (where the coil plugs onto). the BK's are about 2.5mm shorter, could be enough to make a bad connection to the coil?

whether it has a v-groove or not is in the S part of the part number, BCPR6ES is a standard tip, BCPR6E is a v-groove tip.

i just picked up a set of BCPR7ES last week at supercheap, so you can still get them.

Edited by QWK32

ok cool as i might give that a shot

do u know who sells them pregapped to .8 i can get .9 from bursons but im thinking i might goto supercheap and get a gapping tool from them to kinda looks like a 20 cent coin if u know what i mean

im thinking about getting bcpr7es as i have a 25 with nstune ecu cooler exhaust 555cc injectors and 13-14psi for a month or 2 untill i sell my brand new gt3582 so i can get a gt3076 and put that on

get the plug p/n AGSP22YE09 from ford. genuine plug made by denso. my tuner insisted i use them as they are the best they've used and are platinum i think? and only 15 bucks each

Interesting you say this, i noticed when changing the spark plugs in mrs ba xr6 turbo, it had ngk plugs im pretty sure same part number as rb25det plugs... i decided to get some geniune ford plugs, they were marked denso and only cost me $60 for the set... i was thinking of replacing my r34 with the same plugs from ford anyone else can confirm this will be suitable?

Edited by rgr34
  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...