Jump to content
SAU Community

Import Monster Sauvic Deca Motorkhana - 2012 Round 1


Recommended Posts

So I just filled out the form, and also my AASA renewal form,

do you recommend that I wait for my AASA to come back before i fax the form off to you guys? or can I send it off now and fill in AASA details later?

  • Replies 378
  • Created
  • Last Reply

Top Posters In This Topic

I've done a few, maybe 5 or 6 now, but I've never seen another zed out there. Mine was a non-turbo but I converted it to twin turbo last year so this is my first DECA with the new engine, I'll be learning to drive the car again pretty much.

Iv been twice in mine, I thought I was the only one lol, yours turbo ?

do you recommend that I wait for my AASA to come back before i fax the form off to you guys? or can I send it off now and fill in AASA details later?

Fax the entry form off now, and put "TBA" in the AASA number field, and fill out the details on the day, just make SURE you have the information before DECA or you'll have to "sign up" on the day (including repayment) to compete.

I THINK is the way it works...

I've done a few, maybe 5 or 6 now, but I've never seen another zed out there. Mine was a non-turbo but I converted it to twin turbo last year so this is my first DECA with the new engine, I'll be learning to drive the car again pretty much.

Aww dam was hoping it was n/a mines non turbo, will be a good challenge though :P

this was me back in the day lol Edited by Chris_CCRUZE

fingers crossed for my first ever wet deca...

you want a dry deca,:thumbsup:

a wet deca sucks soooo much its almost not worth doing it

if its wet its like trying to drive on ice, just dosent work

if you jynx it then there will be some really unhappy people :laugh:... but :mellow:

YEESSSS jakeeee!!! Although I just found out I can only run like 9psi through the new high mount turbo untill I tune it again and I'm not gonna do that untill I get the new computer and injectors and rah rah rag so I won't be that quick :(

YEESSSS jakeeee!!! Although I just found out I can only run like 9psi through the new high mount turbo untill I tune it again and I'm not gonna do that untill I get the new computer and injectors and rah rah rag so I won't be that quick :(

what high mount you got?

response is better for deca anyways :thumbsup:

Sussing out s15 injectors and tuning it at 13-14psi before deca so Deffs battle ;)

might have a good battle if you get it tuned, ive got a guestimated 180rwkw.ish but pretty responsive

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...