Jump to content
SAU Community

Recommended Posts

good tyres hey, next on my todo list..nankangs not holding on

as for everybody doing their short drives and complaining that their car runs crappy..take a nice long (500kms at least) drive on the weekend every month or 2...does wonders for your engine.. :thumbsup:

If you have ever opened up a motor thats been run hot and hard you will see how clean they are..

problem is all the short drives everything tends to carbon/gum up over time..getting it hot and burning off all that gum can be as easy as a long drive, fill the tank with premium add a bottle of injector cleaner and drive till its empty..fill it up again and drive home..It can do wonders..alternatively just do donuts in the carpark for an hour...If your really fussy when you get back throw a bottle of oil flush in then change the oil too...

If your talking about the car listed in your sig, you have shit tires! LOL!

Mine will hold all the way through second gear, and if theres a fat ass in the back it will be not to bad in 1st either (if i have a full car, 1st gear from 1500rpm will hold all the way through. Pretty neat feeling actually.) :) 255/17 Adrenaline. 280-300odd dyno dependant killerwasps. GT30 .82 @ 17psi.

mine seems to have a very table top torque delivery, when it hits 5000rpm it pulls very hard, feels like it would keep pulling to 8000rpm if it could, but i do have some crappy tyres also, plus tein coilovers dont absorb bumps that great, slightly rough road = sideways action

needs some fat biatches in the back seat i think :laugh: but i want my back seats to remain dry... lol

Edited by SliverS2

mine seems to have a very table top torque delivery, when it hits 5000rpm it pulls very hard, feels like it would keep pulling to 8000rpm if it could, but i do have some crappy tyres also, plus tein coilovers dont absorb bumps that great, slightly rough road = sideways action

needs some fat biatches in the back seat i think :laugh: but i want my back seats to remain dry... lol

LOL! Funny you mention that, as Lithium always said that the higher mine revved the harder it seemed to pull, and it really really takes off after 4500rpm. Makes full boost from 3200-3700odd gear dependant.

This is the best example i could find. 1st one is 2nd from 2500rpm.. 2nd is self explanatory. I have Teins in mine too, and as you can see the road is rather bumpy. Seems to cope pretty well! My last day in NZ in May before moving to Perth. Poor Skyline sitting in a garage not getting loved :(

Everyone loves VIDEOS!!

http://smg.photobucket.com/albums/v295/VTEXTC/?action=view&current=skid2.mp4

http://smg.photobucket.com/albums/v295/VTEXTC/?action=view&current=skid1.mp4

edit: Media tags didnt work? only work for youtube?

Edited by gotRICE?

what about third gear from 3000rpm on a good road, but i know what you mean, third is my only gear that will hold power down, and i can feel its just holding on too.

3rd fries too... So no good... And I am only at E54 on low boost... So if it's frying now it's only going to get better :Pl

LOL! Funny you mention that, as Lithium always said that the higher mine revved the harder it seemed to pull, and it really really takes off after 4500rpm. Makes full boost from 3200-3700odd gear dependant.

This is the best example i could find. 1st one is 2nd from 2500rpm.. 2nd is self explanatory. I have Teins in mine too, and as you can see the road is rather bumpy. Seems to cope pretty well! My last day in NZ in May before moving to Perth. Poor Skyline sitting in a garage not getting loved :(

Everyone loves VIDEOS!!

http://smg.photobucket.com/albums/v295/VTEXTC/?action=view&current=skid2.mp4

http://smg.photobucket.com/albums/v295/VTEXTC/?action=view&current=skid1.mp4

edit: Media tags didnt work? only work for youtube?

just love that gt30 spooling up, nice package too, looked like you didnt need that fat chicks in that one lol :P

Get some 255 or 265 quality tyres on the back none of this poser tire rubbish, power ain't worth shit if you can't use it

Good call! I normally run decent 265s but the dyno date come up fast and all I had was some 235s so I am sure a nice soft 265 will help :D

I don't like stretch, or stance etc... My car is legal height and quiet az... I just have crap rubber at the moment and it's makes 300+ unusable, yet sooooo amusing! Never felt anything like it!

JEM put so many safety measures in place too so I can be confident with the car (unlike my last idiot that tuned the car and is now going out of business........ Well I think and hope)...

  • Like 1

I like your thinking.... I am sick of the "moar low" and "needs spacers" comments.... Needs good rubber and some driving ability and that's it!!!

I like function over form :)

Form is function ;)

Your hurting my brain :P

On topic and on the most recent topic, who is using cheap YET grippy tyres on their 300+ machines, I'm talking RSR, 123s, Ku36 etc.... I dunno which one to get, I'm a bit broke after the whole build and need a temporary solution :)

Good on ya, as long as you know how things should be.

Unlike others who complain they can't get traction who coincidently have stretched cheap rubber lol with rims out the guards, tough is a car where performance isn't compromised by fads

i run 300+ rwkw with stretch, rims outside the guards, low and still have traction.... it's all in the setup

Good on ya, as long as you know how things should be.

Unlike others who complain they can't get traction who coincidently have stretched cheap rubber lol with rims out the guards, tough is a car where performance isn't compromised by fads

wasnt complaining. .just a statement, its a learning curve and its one thing at a time, and on a budget, my tyres and wheels are flush and fill the arches like they should,

i will move onto the traction when the power improvements are finished and it will remain low, full and with 265 ku36's on its fat arse thankyou very much.. :nyaanyaa:

Edited by SliverS2

lol... i seem to get around 15/100 across a tank daily driving with 98 ron

on e85 think more 20/100

:woot: Wow 20/100?! On eflex my economy is around 15.7/100 ;) but id imagine the higher the ethanol content the higher the consumption

wasnt complaining. .just a statement, its a learning curve and its one thing at a time, and on a budget, my tyres and wheels are flush and fill the arches like they should,

i will move onto the traction when the power improvements are finished and it will remain low, full and with 265 ku36's on its fat arse thankyou very much.. :nyaanyaa:

Wasn't referring to you but your set-up is going along nicely :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...