Jump to content
SAU Community

Recommended Posts

Hi, I'm just after some opinions on my setup. Firstly it's a rb25 series 1

Fmic cooler

1000cc injectors

Splitfires

Too feed fuel rail

Forward facing plenum

Bosch 044 fuel pump

6 boost manifold

And turbo is a gt3582 with a tial 38 wastegate

Now on another page I had numerous guys telling me when I go to get it tuned il be looking at about 370hp max at the wheels , does this sound correct ?? I would of thought Abit hire then that, also at what joist should I get my tuner to aim for ?? Just thought 370 hp was pretty low considering, any responses would be appreciated. Thanks Ryan

Naturally depending on boost, fuel, and dyno - I would EXPECT it to be pretty safely achieveable. To be fair with that combo of mods I'd expect over 300kw on anything over 18psi on pretty much any dyno I know of so long as it isn't weasel piss fuel or there isn't something wrong somewhere.

  • 2 weeks later...

Mods:s2 rb25det 248xxxks hks25/30 z32 mad ,nismo 550 injectors ,hks fmic , walbro 600hp fuel pump ,bigger fuel lines,apexi power fc

Power:239kw@9psi(didn't bother going higher as its my daily)really safe tune.

Oil:mogul

Usage:daily/weekend hacker yet to see a track or strip

Lifespan:4years still performing well

Failures:coil packs and afm changed them to sliptfire an z32

comments:lets see if I can make it to 300000ks ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...