Jump to content
SAU Community

Recommended Posts

Car does daily duties on this set up > http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/page-42

And the above for a drag day.

Notice the backend was changed and also no WMI is used alongside the C16 as it kills the power. Afrs are around 12.0 so injs have a little room still.....and so does the turb :yes:

Havent sorted the suspension for it to hook and put down an Et yet tho.....

my turbo has no antisurge and stock airbox...there is no whistle

actually apart from exhaust noise there is nothing

poor Bast#rd!! the whistle is awesome, get the cover and fill the streets with some RB 3076 whistle!! Edited by AngryRB

GTX wheels have quietness as one of their design targets - they are intended for industrial etc use, one of the reasons why some of the more high performance targetting (ie, EFR, HTA) potentially will have the edge in other ways over them, as response/wide & tall compressor maps etc are the intentions.

I'd take a closer look at a "GT3076R" with a T04S compressor housing on it , just to make sure that it has the GT37 compressor wheel in it .

I'd want the HTA wheel if I was running that housing or something that performed similar to it .

Does anyone know if Tao at Hypergear is doing cold side upgrades to GT30 turbos ? I'll ask this in their thread too .

  • 1 month later...

Standard re built S1 rb25, pon cams, ex cam gear +8, walbro 460 highflow standard side feeds 740cc, power Fc, hks gtrs kit, blitz fmic, gtr itbs etc etc

United E85

Royal Purple 10w40

Street driven soon to be tracked

303wkw @ 20psi

Massive boost leaks and 4psi back pressure at 20psi at O2 sensor port and clutch issues... All to be sorted next weeks and a retune with new eboost2 controller

I don't think you know what unopened means bro

I know what unopened means 'Bro'....... hahaha i read the title and my head automatically interpreted it as 'standard bottom end' lol

anyway whatever haha we all make mistakes :P

Edited by LaurelPWR

Still good power out of a gtrs. Lag must be non existent almost

Nah man its a little lagy hey....... as i said earlier, tons of boost leaks and some other issues haha soon to be all fixed :D

check it - http://www.skylinesaustralia.com/forums/topic/441053-should-my-hks-gt-rs-be-making-boost-earlier-e85/

I know what unopened means 'Bro'....... hahaha i read the title and my head automatically interpreted it as 'standard bottom end' lol

anyway whatever haha we all make mistakes :P

relax man just having a stab. Those results seem pretty good for a gtrs on 20psi with a whole heap of boost leaks to the point where it feels laggy. I wonder how much the cams helped that figure. Also do you have vct? Might be a factor in the laginess you're experiencing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...