Jump to content
SAU Community

Recommended Posts

  • Replies 157
  • Created
  • Last Reply

Top Posters In This Topic

One thing I'll add for those out there that have only done a few track days. Get into a car as a passenger with one of the experienced guys. It takes a few laps to get over the sensation of not being in control, but you learn heaps!

You learn a lot by doing but if you are a keen observer, you can learn a lot that way too.

hey guys, last minute entry.

ive emailed my form, im with NAB but im not sure if the money will clear by tonight, can i pay on the day??

ill also need a license purchased on the day.

estimated avival time is 730 to get everything sorted.

If anyone would like some pointers, grab me for a session - I'll be around the dummy grid or flag point somewhere.

i'd like to grab you for a session........oh wait.....

on second thoughts, the boat did need something to chase :P

if you ppl lower your standards enough to jump in a pissy little 2L then i'll cling wrap my passenger seat in case you have any accidents ;)

hey guys, last minute entry.

ive emailed my form, im with NAB but im not sure if the money will clear by tonight, can i pay on the day??

ill also need a license purchased on the day.

estimated avival time is 730 to get everything sorted.

incase you werent sure paying on the day is fine..




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...