Jump to content
SAU Community

Recommended Posts

Given how much i drive my car, its more like every 4-5 months which in k's is less than 1000. Oil and filter

Why??

The car is rarely driven but started often. It probably idles more minutes than it gets driven. I've heard that with excessive idle time, fuel can dillute the oil, so i play it safe by changing it more regularly than some. Its still only around 2-3 changes a year so its not a massive cost.

I should just get my a$$ into gear and do an oil analysis so i know if it is actually diluting - but seems more effort than 2 changes a year :)

A weekly warm up > 15Km run with occasional sprints > decent warm down > tuck her into bed!

That's the way to treat a healthy athlete - of rarity

...eh Bobby?

Lube with something a bit better than KY Jelly??? :)

lol, thats my plan for this year :)

Hasn't worked so far though. I did wash it on Sunday but, so that meant driven out then back in the garage. Does that count ??

Yeah adds to it...

But leaving a car parked for extended amounts of time in some cases is not good.

Just take it out for a good spirited drive on the weekends.

Cars are meant to be driven.

:)

Yeah adds to it...

But leaving a car parked for extended amounts of time in some cases is not good.

Just take it out for a good spirited drive on the weekends.

Cars are meant to be driven.

:)

I change my oil every 5000km on all my cars.

Very true about not driving the car often. The R34 sits in the garage and only taken out on some sunny days, now the suspension is slighlty noisy, streering sometimes groans. Once I use the car for a few days in a row - no squeeks or groans.

Q. When you're checking over a car for yourself or a friend, do many of you...

a) poke your finger under the filler cap to feel for grit and sludge?

b) smell the oil on the dipstick for burnt odour?

c) check the colour for blackness?

d) check for presence of immiscible water present?

e) check the coolant for oil present?

BTW I change oil every 5000Km or 6 months whichever's earlier + before hard driving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
    • Very cool, see what I did there? 🥲 Wild WMI setup, first I've seen where it's on each cylinder runner, usually I see a single jet pre throttle.
×
×
  • Create New...