Jump to content
SAU Community

Rb30 Dipstick Length?

NYTSKY

By NYTSKY,
in Engines & Forced Induction

 Share

Recommended Posts

NYTSKY Grand Master

NYTSKY

Posted
Posted

Hi all,

Need to know the length of an RB30 dipstick, could one of you guys please measure the length from the tip to the base (not including any of the plastic handle), just the metal strip.

Needs to be very accurate, in mm. Also need the distance from the tip to the full line.

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/392502-rb30-dipstick-length/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

OK I have what I believe to be an RB30 dipstick. It has the Nissan logo and 42LO1 stamped on it.

From the tip to the beginning of the plastic bit is326mm

to the bit of the plastic that hits the tube 352mm

to the top of the crosshatched area 35mm

to the centre of the kink 50mm (the letter H is stamped between the top of thr cross hatched area and the kink.

The Bogan Grand Master

The Bogan

Posted
Posted

Mine is 440mm from seat to tip, 419mm from end of plastic to tip, 35mm from tip to H, 22mm from tip to L.

Mine has the Nissan logo but with 21000 stamped on it as well.

The tube length is 310mm (+ - 5mm) from the block to the end of the tube.

I think the tubes may be of diffeent size for the different blocks, models, series, maybe ?????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...