Jump to content
SAU Community

Recommended Posts

So i've got a R33 GTS-T With:

Silicone Cold Air Intake Pipe

Fujitsubo Geiken 3" Stainless Exhaust

Stainless Dump Pipe

Yellow Jackets Coil Packs

BMC Air Filter

My question is;

I want to tune the car with all this + wind stock turbo up to 12 Psi

Can i get a flash tune? or does every skyline have to use a Power FC to be tuned??? Its not just a matter of taking it to a tuner and saying ok go for it??

cheers!

Link to comment
https://www.sau.com.au/forums/topic/392924-tuning-a-rb25det/
Share on other sites

What? If you want someone good go to Status tuning. Don't go to other websites suggested tuners or workshops. I personally have never heard of spring motors(being from Sydney) but I have heard of the names of popular tuners which get used on here often. Status is the first one to come to mind down that way.

What? If you want someone good go to Status tuning. Don't go to other websites suggested tuners or workshops. I personally have never heard of spring motors(being from Sydney) but I have heard of the names of popular tuners which get used on here often. Status is the first one to come to mind down that way.

+1 to this

The guys there seem to do an amazing job

I'm not going to say that the other tuner suggested by the liberty forums is shit, just its a name I am unfamiliar with when it comes to this forum. The general consensus is: If its on this forum and given the go, its good for your skyline. People don't trust eBay turbos because they are unknown and untested BUT if you read on here about the Kando turbo, which is essentially an eBay turbo, they are given the thumbs up and alot of skyliners are getting into them. You ever mention the name hypergear to anyone who doesn't drive a skyline? They won't have ANY idea what you are talking about. Then come here and find a 200page thread on this turbo and every step its taken to be developed into a pretty awesome turbo for the skyline.

GTI forums, my mate was showing me. Some weird name of some guy who does backyard tuning and my mate was like take your skyline there. I was simply like what the f**k, WHO the f**k IS HE? Some backyard guy working on my skyline? He might know his way around a GTI but I won't let him near my car. Toshi on here is a backyard tuner, probably one of the best tuners you could come across in Sydney. Horses for courses.

Edited by SargeRX8

or just get PFC from the classifieds..personally i wouldnt bother with either cause you are relying on too many 20 yr old parts.....I'd go see Hypergear with a couple of grand and invest in a cheap boltin hiflow and a brand new adaptronic ECU package then go see Chequered tuning..( the artist formerly known as STATUS )

will yield you less headaches, faster car and value for money all round..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...