Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Not sure if anyone is interested;

I have a pair of Cad plated steel R32 GTS-t caliper offset brackets to suit 350Z rotors; High tensile bolts and all mounting hardware.

I bought them to do an upgrade on my Stagea; but ended up going R34 GT-t 310mm; so I don't need these.

Paid $100 from the US, but I was hoping to get around $60 (plus postage) they are unused; only trial fitted to a caliper to check clearances.

Feel free to PM if you'd like some pics.

  • 2 months later...

GK tech now make these adapters BTW:

http://www.gktech.co...sp?id=GTRX-ADPT

Good value, shame there is no option for 34GTT though to go to bigger rotors :(

I downloaded a free cad program and had a couple of mild steel brackets laser cut for my car, std caliper 310 to 324.

This lets me run some local 2 piece gtr rotors for track days - x3e brand.

These are heavy brackets with only a 7mm radial increase, but alloy hats should reduce the weight and be better at dissipating heat.

I haven't fitted them yet, as need to sort out how to secure the hard brake line.

A better option would be to use 330x32 rotors, but this needs too much modification to the sumitomo caliper, ie. a 2mm packing spacer, longer caliper bolts, longer retainer clip pins + sourcing longer internal brake fluid gallery o-rings.

Will post pics when sorted.

GK tech now make these adapters BTW:

http://www.gktech.co...sp?id=GTRX-ADPT

No they don't. Those are to suit R32, Z32 and S13/14/15. R33 is different as the calliper legs are to suit a 296mm, not 280mm.

I downloaded a free cad program and had a couple of mild steel brackets laser cut for my car, std caliper 310 to 324.

This lets me run some local 2 piece gtr rotors for track days - x3e brand.

These are heavy brackets with only a 7mm radial increase, but alloy hats should reduce the weight and be better at dissipating heat.

I haven't fitted them yet, as need to sort out how to secure the hard brake line.

A better option would be to use 330x32 rotors, but this needs too much modification to the sumitomo caliper, ie. a 2mm packing spacer, longer caliper bolts, longer retainer clip pins + sourcing longer internal brake fluid gallery o-rings.

Will post pics when sorted.

Nice one! Will wait for pics and results :thumbsup:

  • 4 weeks later...

I am finally going down this path..... Using 350mm Evo rotors with Evo callipers, are there any downsides to doing a brake kit with adapters? I assume an engineer can check and pass them for road use? (They state offroad use only but i guess an engineer may be able to pass them if they meet requirements?)

I am a brake noob so any advice would be good :D

I've just bought a set of rda slotted gtr rotors to try with my caliper adapters, just waiting for my dba 4000s to wear down before I upgrade.

Now, after using the standard gtt brakes on a racetrack winton/sandown, they hold up pretty well with the right pads and ducting - I still need more air though as rims are very hot.

Maybe you should give this a go then go bigger if not happy - if your tracking.

  • 1 month later...

Sorry guys, we have had a million things going on and are literally working 80-100 hour weeks.

Just this week the design of our rear knuckles was signed off (350 hours or so in the design) and we're now working on R32/R33 knuckles. In doing that, we've got an R33 knuckle (aka upright) sitting here and I'll get it measured up in the coming days.

There is a VERY good chance that the brackets will be $99/pair with fasteners. We'll machine them out of 7075-T5 for some extra strength and unlike the UAS brackets we also run thread inserts.

A few install pictures of our S14/S15/R32 brackets can be seen here: http://www.skylinesa...ost__p__6549940

To keep up to date, check out our facebook page here as we'll post up about an intro price there (probably $79/pair): http://www.facebook.com/gktech

Greg

Apart from Unique Autosports does anybody else make the brake caliper adapters to go from 296mm to 324mm rotors?

These are to use the stock GTST calipers with the larger GTR rotors (going to use the 2-piece ATTKD rotors I think).

If not I guess I'll just have to fork out the $350 for the adapters.

ADAPTERS

didnt read the whole thread but holford motors make a kit with the mounts and rotors for $330

http://www.ebay.com.au/itm/HFM-GTR-324MM-Rotor-Upgrade-Kit-With-Caliper-Adapters-/150879077844?pt=AU_Car_Parts_Accessories&hash=item23211805d4

Edited by Frosty

didnt read the whole thread but holford motors make a kit with the mounts and rotors for $330

http://www.ebay.com....=item23211805d4

No. These are effectively the same as all the others out there. They suit changing from 280mm rotors to 324mm. They do not suit upgrading R33 296mm rotor/caliper setups to 324mm rotors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...