Jump to content
SAU Community

Recommended Posts

Roy, UAS track days are for everyone. I have been accused of over favouring GTR's in the past, this was from a few of the zed guys. This was because we had 12 GTR's at the track one time and they get their own sessions along with race cars.

This day will sort out the men from the boys. I would not speak too soon as I have a good customer Gary who has owned a heap of GTR's, and is very experienced at the track. He has also done quite a few Targa's. He was the guy who drove the white N1 set up R33 GTR a few years back that ended up a tree, and him in hospital. The following year he wrote off another R32 GTR, head on into a tree. He is a good driver but has a big go. This year he is not doing Targa and put his effort into beat me at this track day. He has accumulated lots of good bits out of his 3 R32 GTR's and put them into one to make an awesome track car. Featuring Holinger sequential gear box which is good for at least a second a lap. He say more like 2. Big motor with 2540's and forged internals etc and 350kw at all 4. Stripped out with cage, big brakes etc. He is not beer talk. Will be very interesting. His fastest time was 106 .95 with the sequential box in the R33 N1 GTR. His new current race R32 GTR should do better than this. It will need to.

Tosh ( SW20 ) was over today and has has seen what we are doing. Last year the Zed was stadard internals and not too many mods but now it is full on now. We are running S15 turbos in the "Franken Zed "which are same HP rating as N1 spec so still can compare I guess, but yes lots of other things. It is again getting more like a GTR as now has Tomei RB26 solid lifters to add to the GTR bits in it.

I might Add Geoff from SSS Automotive will be out in his Gibson powered R32 GTR and has done more mods including better brakes and gear box, and will be in there. Joe also from SSS Automotive might be there with his well over 400kw at wheels R32 GTR. Power is not everything though.

  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

Will surely be a great day John and a great opportunity to see some awesome machines in full flight.....

I'll be there sometime through the afternoon to come for some laps :P

p.s. As John mentioned I was out there yesterday and DAMN is he going to some major measures to lighten the car!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...