Jump to content
SAU Community

Recommended Posts

Hi peeps,

Wondering if someone out there with 1337 photochop skills (well, better than my non-existent skills) would be kind enough to chop a set of Volk TE37s in gun-metal onto this R32 GT-R for me -- I'm afraid this is the nearest to a side on shot of a gun-metal R32 GT-R I could fine -- if you have a better one, feel free to substitute:

brettswetgtr.jpg

And now the wheel:

rearquarterview.jpg

The colour is a little off, it looks more like this:

daichanh4-img600x450-1082862058dscf0005.jpg

Thanks guys -- just trying to work out if they will look good, or clash :( One final thing, is anyone sure what the widest rims you can legally fit an R32 GT-R is in NSW without engineering, and furthermore, what the cost of engineering might be?

Lucien.

They will look totally off their noodle... Best looking combo you can have!

Ignore my 2 second photoshop job... they will looks fantastic.

p.s. You do realise the R32 non-projector headlights are much cooler than the projector ones.

One clown referred to them as N1 headlights!???? He could have been right.

Anyway, they are different, so keep them!

Engineering is about $400.

 

click here for wheel modification legalities.

Thanks, although I think that has made me more confused. As I understand it, the widest and largest wheels fitted to the R32 GT-R were the BBS's that came on the V-spec 1 and 2, and they were 17x8s.

Now according to this doc, vehicles with an unsprung weight of 1201kg and over -- which I assume the R32 is -- are allowed to go up to 2" over the largest wheel that was offered on the car: in other words, up to x10s.

But, and this is what I don't get, your only allowed a 25mm increase in track-width.. Now track width seems to be measured from the centre of the rim on the left, to the centre of the rim on the right. So you halve the increase in rim width, then times by two, correct? In otherwords

17x9s = 1" increase in track

17x9.5s = 1.5" increase in track

17x10s = 2" increase in track

With 25mm (1") being the widest increase in track, the widest one could legally go on an R32 GT-R would thus be x9".

Is that right or am I just completely wrong?

Gojira: Thanks, I reakon TE37s are awesome, but I am trying to work out if the gunmetal grey TE37s would work with a gunmental R32.... Your photochop makes them look almost bronze/gold :P

Edit: My car has the projector style lights, which I prefer. I will be modifying them anyway for bi-xenon so I need the projector style :)

Lucien.

Thanks, although I think that has made me more confused. As I understand it, the widest and largest wheels fitted to the R32 GT-R were the BBS's that came on the V-spec 1 and 2, and they were 17x8s.

Now according to this doc, vehicles with an unsprung weight of 1201kg and over -- which I assume the R32 is -- are allowed to go up to 2" over the largest wheel that was offered on the car: in other words, up to x10s.

But, and this is what I don't get, your only allowed a 25mm increase in track-width.. Now track width seems to be measured from the centre of the rim on the left, to the centre of the rim on the right. So you halve the increase in rim width, then times by two, correct? In otherwords

17x9s = 1" increase in track

17x9.5s = 1.5" increase in track

17x10s = 2" increase in track

With 25mm (1") being the widest increase in track, the widest one could legally go on an R32 GT-R would thus be x9".

Is that right or am I just completely wrong?

Sounds right, but I think its wrong. :P :confused:

Doesn't matter how wide the rim is (ie 17x8 or 17x10) so long as the offset is ok....

Fig 1. 17x8 inch rim

|_|-----|_| -> say thats a 2000mm track.

Fig 2. 17x10 inch rim

|__|---|__| -> that may now be a 1900mm track because the wheel sits further insde the guards than the 17x9's.

Fig 3. 17x10 inch rim with wrong offset

|__|-----|__| -> now you have a track of 2200mm because the offset forces the wheel to be further out of the centre of the car.

Does this make sense?

Christian

Does this make sense?

Arr, ok, so the offset helps to compensate? I didn't know that -- I thought it was basically there to ensure the wheel would clear the calipers.

So as long as I get the right offset, I should be ok even if I went to the max of 2"s? Can anyone confirm this from experience?

Thanks again guys -- appreciate the info.

Lucien.

Well, having never had any issues with the cops, I can't give any info on legal experiences, but i did have WORK 18x10's on my GTR for a while and the wheel track was less than standard because they sat further in the guards (we measured the track at UAS).

Christian

Anyone have a picture or know if a pair of buddy club p1 racing rims in the gold colour would look good on an white r33 gtst...series2?

i realli want to see wat it lookz like!

There are quite a few example pics on Buddy Club's website -- admittedly non of a

white R33, but a lot of white cars, and a black R33 with gold:

http://www.first-inc.co.jp/buddyclub/p1r/p1r.html

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...