Jump to content
SAU Community

Recommended Posts

  • Replies 171
  • Created
  • Last Reply

Top Posters In This Topic

wtf people?

do you only own one car?

drive what ever you have, or just say you dont want to come.

and you know you want to come.

so, drive your car.

drive your other car.

borrow a car from family or friends.

bum a ride with someone else.

hire a car.

catch a cab.

catch a bus.

just do it!

this message brought to you by the pro putty rd committee.

I'll be there. Coming down Bells Line to RAAF base meeting point. Planning to go home via the Golden Way+Bylong Valley way. Only 15 minutes longer from Singleton to my place than returning down Putty Rd.

Got my fluffy toy for the front of the car.

I'll be there. Coming down Bells Line to RAAF base meeting point. Planning to go home via the Golden Way+Bylong Valley way. Only 15 minutes longer from Singleton to my place than returning down Putty Rd.

Got my fluffy toy for the front of the car.

I've driven the Bylong Valley rd in the truck and that was fun

Would be freakin awesome in a skyline

wtf people?

do you only own one car?

drive what ever you have, or just say you dont want to come.

and you know you want to come.

so, drive your car.

drive your other car.

borrow a car from family or friends.

bum a ride with someone else.

hire a car.

catch a cab.

catch a bus.

just do it!

this message brought to you by the pro putty rd committee.

Haha for some reason Im not convinced a two tonne car will handle putty road very well :)

Haha for some reason Im not convinced a two tonne car will handle putty road very well :)

35gtr is nearly 2T....

And so is an older gtr with a few passengers.

And its not a race, so you should be ok.

What's happened to the Nur Matt? :(

Hey mate,

Thanks it's ok it's just at the workshop getting a tune and it needs a few more days. Hate turning down Putty Rd but thems the breaks...

For newcastle ppl taking the short route we are meeting at Warners Bay maccas @ 10:30 am....& Leaving around 10:45

there will be a few 32's & 33's there.

Edited by Lukez32
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...