Jump to content
SAU Community

Recommended Posts

My vote is still for the KU36 as a great value for money proposition. They stick like shit to a blanket in the dry. They don't grip quite as well until you get a little heat in them, and this more so in the damp, but I have never had cause to worry about how well they hold on in the wet, even in streaming water, even with only 1mm of tread depth left, once they are warm. Which doesn't take long.

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I'm running -3.5 front and -2 rear camber, Hankook ventus RS 3, 255/40 17.

I have no understeer on the street wet or dry.

Cheap hard tyres are fine for shopping trolleys or doing skids.

Tyres cost $125 a piece from tire rack.$730 delivered.

Why do people buy sporty style cars and then go pov on the most important part.

^^ This man speaks the truth!

they are okay for the street and daily driving, i haven't pushed them too hard yet but i'd imagine they would be alrite in the dry but loose grip when it gets too hot (sorta like how the proxes 4 were after 4laps @ wakie)

does anyone know of any places that stock hankook ventus in NSW at a decent price?

from tirerack, it equals toa bout $250 a tyre after shipping so anythign around that range, i'd be happy to pay.

I haven't had problems with the 595SS over the time I've used them. In a previous car (a turbo FWD) they were a lot better than some pirellis that cost me a lot more and performed worse. Not hard to control in the wet at all.

At the moment I have 595 RSR's on the front of my XR6T and they never give me an issue either even when its pi$$ing down. There's gotta be something else up with people that are having massive issues, whether its driving style or car setup or something else again. Not saying that better tyres wouldnt help, but considering a very significant percentage of cars on the road (id imagine at least 75+) run worse tyres and that you dont see people spinning out or crashing at every corner in the wet, then maybe it's not just the rubber.

they go to shit after 4 track days because they arent the sort of tyres that are ideal for the track

i wouldnt have though tyre compound would have a bearing on wet performance, the tread pattern is what gives a tyre wet performance

i wouldnt have though tyre compound would have a bearing on wet performance, the tread pattern is what gives a tyre wet performance

Tread pattern and compound both effect wet performance, a hard tyre will not "blend into the surface" (for want of a better phrase).

I run Toyo T1R's on my GTR and street GTS-T because I want good grip in both wet and dry conditions and as I do only a small number of k's in these cars the price of $1400 for a set is justified.

On our track GTS-T we run Federal 595 SS as our street tyres because we have semi's for track use. With the more agressive wheel alignment and suspension components you cannot justify the cost of high performance street tyres and with their softer compounds they would only have a short life span. The Federals do this job well but they are nothing like the Toyo T1R;s to drive on.

  • 6 months later...
  • 2 weeks later...

Pump your tyres up to 40psi.

Get wheel alignment done. Ask for pre and post alignment printout.

Mabey a obvious question to some. But.....

What determines the tyre pressure? Ie size? would a 235/40/18 be different to 235/40/19, Rim width? car weight?

Doing a bit of reading now, Seems people are doing there own calcs based on car weight.

R33 GTS4- My door car read 32 PSI max - thats what i always had them. Wheels were some jap 15" rubbish.

Edited by sydking

The best tyre pressure to use is that which gives the best result. This is easy to work out. You fang the car through some corners that you know and assess how it feels and how well it goes/grips. Then you add a few psi. Refang. More psi. Refang. It will have a region where it feels best and then it will probably start feeling bad. The middle of the "feels best" region is most likely your best tyre pressure. For performance anyway.

Done on a track you can time the car and you can measure the tyre surface temperature as well. This will allow you to work it out down to 1 psi accuracy, although you might find that you need different pressures in different tyres (on the same track) and different pressures between tracks. That's just because different tracks put more or less load on different tyres relative to each other.

In general, on modern radials, you will get OK performance at 32 psi and tyre life will be fine. If you flog the car hard through the hills though, you will probably experience the tyres getting hot if you start at such a low pressure. So most often you'll end up needing to run in the mid 30s. Even in the same size, some tyres have stiffer sidewalls and so will need less pressure. Others will need a few extra psi. All worked out by experimentation. Anyone who tries to do it by calculation has their head stuck up their arse and needs to get off the computer and out into the real world.

KU31 are quite possibly better than the 595SS in the wet. That wouldn't be hard - the KU31 has a fairly normal tread pattern and the 595SS is pretty poor in the wet. I would still expect the 595SS to be better in the dry than a KU36, but of course, everyone's mileage will vary.

KU31 are quite possibly better than the 595SS in the wet. That wouldn't be hard - the KU31 has a fairly normal tread pattern and the 595SS is pretty poor in the wet. I would still expect the 595SS to be better in the dry than a KU36, but of course, everyone's mileage will vary.

why would you expect the 595ss to be better then the Ku36, WHen the closest comparrison to the 36 is the RSR. Both should be miles ahead of the ss. or 31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...