Jump to content
SAU Community

Recommended Posts

last minute calls for a Wakey track day with NSCC on this Sunday.

yeah its the day after the SAU one but if your hardcore like me you will just stay overnight and get back up in the morning ready for more!

heres a cut and paste from their thread

For members who pay after March 20th the cost will be $155.00 wink.gif

These are eagerly awaited days and payment into the account is your only guarantee of a spot

So get those names down and payments in to secure your spot

New Members are warmly invited to attend. Instruction from experienced drivers will be offered on the day

Note you will need a Cams L2S license (See www.cams.com.au ) you can also do it online, (refer to CAMS sticky) or purchase a yearly Wakefield license on the day which is about $50.00

You can hire a helmet at Wakefield $20 with a $50 deposit.

You will also need long pants, good closed shoes, a helmet and long sleeved shirt.

Bring your Numbers if you have them allocated or we will allocate one for you on the day.

Battery triangle and Fire extinguisher not required for the day.

NOTE: Scruitineering will be starting at 07:30am

Start Time 07:30 am

Drivers Briefing 08:30 am

First Session 09:00 am

Lunch 1:00 pm

Second Session 2:00pm

End of Day 4:00pm

Read the following FAQ's

Wakefield Park

http://www.nissansportscarclub.org/f...read.php?t=429

Track Day Basics

http://www.nissansportscarclub.org/f...read.php?t=565

member ship is fifty bucks i think but you dont need to join, probably just a bit extra on top of the normal fee.

thread is here

http://www.nissansportscarclub.org/forum/showthread.php?t=5101

Link to comment
https://www.sau.com.au/forums/topic/395363-track-day-wakefield-25th-march/
Share on other sites

Aha mark the Valdez holds its oil inside. Your car is more like a Bp oil rig in the gulf of Mexico :P

http://en.m.wikipedia.org/wiki/Exxon_Valdez_oil_spill

This is what I'm talking about Willis.

And it was a boat too, just like the 33.

Which is slightly lighter with no carpet and "most" of the deadener removed (note: it take more than 5kg of dry ice pellets to do a 33, 10kg would have been good)

  • 2 weeks later...

how much weight do u think it removed? how loud is it now?

It is a bit louder but I use the nissan floor mats which keeps the noise down a bit, but then I like noisy cars anyway, listening to the fuel pump, clutch, diff, small rocks kicking around inside the guards and stuff is cool.

Weight wise it would be lucky to be 8 kg all up, the heater core leaked so the carpet was kaput so had to come out anyway, the deadener I removed was more for something to do experiment/ fun/bored wise.

If I can get the car going without spitting oil Im going to strip out as much as I can, Ill still be keeping the A/C though.

It is a bit louder but I use the nissan floor mats which keeps the noise down a bit, but then I like noisy cars anyway, listening to the fuel pump, clutch, diff, small rocks kicking around inside the guards and stuff is cool.

Weight wise it would be lucky to be 8 kg all up, the heater core leaked so the carpet was kaput so had to come out anyway, the deadener I removed was more for something to do experiment/ fun/bored wise.

If I can get the car going without spitting oil Im going to strip out as much as I can, Ill still be keeping the A/C though.

The AC and all the fan shit is probably the heaviest stuff you can take out... LOL

Your other major weight area is to re-wire the whole freaking car.

Otherwise... Don't bother really.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...